srfi-151 | chickadee

SRFI 151: Bitwise Operations

Repositories

Canonical SRFI-151 repository: https://github.com/scheme-requests-for-implementation/srfi-151
SRFI-151 packaged as a CHICKEN egg: https://github.com/nmeum/srfi-151 (the egg comes from this repository)

This SRFI is currently in final status. Here is an explanation of each status that a SRFI can hold. To provide input on this SRFI, please send email to srfi+minus+151+at+srfi+dotschemers+dot+org. To subscribe to the list, follow these instructions. You can access previous messages via the mailing list archive.

Received: 2017-05-02
Draft #1 published: 2017-05-03
Draft #2 published: 2017-05-14
Draft #3 published: 2017-05-21
Draft #4 published: 2017-07-02
Draft #5 published: 2017-07-10
Finalized: 2017-07-10
Revised to fix errata:
- 2017-07-25 (Fixed examples under bit-field-any? and bit-field-every?. Removed obsolete test.)
- 2017-10-18 (Fixed small errors in comparison table, which is in a non-normative section.)
- 2019-04-06 (Italicize integer->list, list->integer, and booleans->integer to reflect the changes made in SRFI 151 from SRFI 142.)

Abstract

This SRFI proposes a coherent and comprehensive set of procedures for performing bitwise logical operations on integers; it is accompanied by a reference implementation of the spec in terms of a set of seven core operators. The sample implementation is portable, as efficient as practical with pure Scheme arithmetic (it is much more efficient to replace the core operators with C or assembly language if possible), and open source.

The precise semantics of these operators is almost never an issue. A consistent, portable set of names and parameter conventions, however, is. Hence this SRFI, which is based mainly on SRFI 33, with some changes and additions from Olin's late revisions to SRFI 33 (which were never consummated). SRFI 60 (based on SLIB) is smaller but has a few procedures of its own; some of its procedures have both native (often Common Lisp) and SRFI 33 names. They have been incorporated into this SRFI. R6RS is a subset of SRFI 60, except that all procedure names begin with a bitwise- prefix. A few procedures have been added from the general vector SRFI 133.

Among the applications of bitwise operations are: hashing, Galois-field calculations of error-detecting and error-correcting codes, cryptography and ciphers, pseudo-random number generation, register-transfer-level modeling of digital logic designs, Fast-Fourier transforms, packing and unpacking numbers in persistent data structures, space-filling curves with applications to dimension reduction and sparse multi-dimensional database indexes, and generating approximate seed values for root-finders and transcendental function algorithms.

This SRFI differs from SRFI 142 in only two ways:

The bitwise-if function has the argument ordering of SLIB, SRFI 60, and R6RS rather than the ordering of SRFI 33.
The order in which bits are processed by the procedures listed in the Bits conversion has been clarified and some of the procedures' names have been changed. See Bit processing order for details.

Rationale

General design principles

These operations interpret exact integers using two's-complement representation.
The associative bitwise ops are required to be n-ary. Programmers can reliably write bitwise-and with 3 arguments, for example.
The word or is never used by itself, only with modifiers: xor, ior, nor, orc1, or orc2. This is the same rule as Common Lisp.
Extra and redundant functions such as bitwise-count, bitwise-nor and the bit-field ops have been included. Settling on a standard choice of names makes it easier to read code that uses these sorts of operations. It also means computations can be clearly expressed using the more powerful ops rather than synthesized with a snarled mess of bitwise-ands, bitwise-ors, and bitwise-nots. What we gain is having an agreed-upon set of names by which we can refer to these functions. If you believe in "small is beautiful," then what is your motivation for including anything beyond bitwise-nand?
Programmers don't have to re-implement the redundant functions, and stumble over the boundary cases and error checking, but can express themselves using a full palette of building blocks.
Compilers can directly implement many of these ops for great efficiency gains without requiring any tricky analysis.
Logical right or left shift operations are excluded because they are not well defined on general integers; they are only defined on integers in some finite range. Remember that, in this library, integers are interpreted as semi-infinite bit strings that have only a finite number of ones or a finite number of zeros. Logical shifting operates on bit strings of some fixed size. If we shift left, then leftmost bits "fall off" the end (and zeros shift in on the right). If we shift right, then zeros shift into the string on the left (and rightmost bits fall off the end). So to define a logical shift operation, we must specify the size of the window.

Common Lisp

The core of this design mirrors the structure of Common Lisp's pretty closely. Here are some differences:

"load" and "deposit" are the wrong verbs (e.g., Common Lisp's ldb and dpb ops), since they have nothing to do with the store.
boole has been removed; it is not one with the Way of Scheme. Boolean functions are directly encoded in Scheme as first-class functions.
The name choices are more in tune with Scheme conventions (hyphenation, using ? to mark a predicate, etc.). Common Lisp's name choices were more historically motivated, for reasons of backward compatibility with Maclisp and Zetalisp.
The prefix log has been changed to bitwise- (e.g, lognot to bitwise-not), as the prefix bitwise- more accurately reflects what they do.
The six trivial binary boolean ops that return constants, the left or right arguments, and the bitwise-not of the left or right arguments, do not appear in this SRFI.

SRFI 33

This SRFI contains all the procedures of SRFI 33, and retains their original names with these exceptions:

The name bitwise-merge is replaced by bitwise-if, the name used in SRFI 60 and R6RS.
The name extract-bit-field (bit-field-extract in Olin's revisions) is replaced by bit-field, the name used in SRFI 60 and R6RS.
The names any-bits-set? and all-bits-set? are replaced by any-bit-set? and every-bit-set?, in accordance with Olin's revisions.
The name test-bit-field? has been renamed bit-field-any? and supplemented with bit-field-every?, in accordance with Olin's revisions.
Because copy-bit-field means different things in SRFI 33 and SRFI 60, SRFI 33's name copy-bit-field (bit-field-copy in Olin's revisions) has been changed to bit-field-replace-same.

SRFI 60

SRFI 60 includes six procedures that do not have SRFI 33 equivalents. They are incorporated into this SRFI as follows:

The names rotate-bit-field and reverse-bit-field are replaced by bit-field-rotate and bit-field-reverse, by analogy with Olin's revisions.
The procedure copy-bit is incorporated into this SRFI with the same name.
The procedures integer->list and list->integer are incorporated into this SRFI with the slightly different names integer->bits and bits->integer because they are incompatible with SRFI 60.
The procedure booleans->integer is a convenient way to specify a bitwise integer: it accepts an arbitrary number of boolean arguments and returns a non-negative integer. So in this SRFI it has the short name bits, roughly analogous to list, string, and vector.

Other sources

The following procedures are inspired by SRFI 133: bit-swap, bitwise-fold, bitwise-for-each, bitwise-unfold.
The procedure bit-field-set is the counterpart of bit-field-clear.
The procedures bits->vector and vector->bits are inspired by their list counterparts.
The make-bitwise-generator procedure is a generator constructor similar to those provided by SRFI 127.

Argument ordering and semantics

In general, these procedures place the bitstring arguments to be operated on first. Where the operation is not commutative, the "destination" argument that provides the background bits to be operated on is placed before the "source" argument that provides the bits to be transferred to it.
In SRFI 33, bitwise-nand and bitwise-nor accepted an arbitrary number of arguments even though they are not commutative. Olin's late revisions made them dyadic, and so does this SRFI.
Common Lisp bit-field operations use a byte spec to encapsulate the position and size of the field. SRFI 33 bit-field operations had leading position and size arguments instead. These have been replaced in this SRFI by trailing start (inclusive) and end (exclusive) arguments, the convention used not only in SRFI 60 and R6RS but also in most other subsequence operations in Scheme standards and SRFIs.
In SRFI 60, the bitwise-if function was defined with a different argument ordering from SRFI 33's bitwise-merge, but was provided under both names, using the SLIB ordering. SRFI 142 adopted the SRFI 33 ordering rather than the SLIB and R6RS ordering. Since SLIB and R6RS have seen far more usage than SRFI 33, this SRFI adopts the SRFI 60 ordering instead.

Bit processing order

In SLIB and SRFI 60, the the order in which bits were processed by integer->list and list->integer was not clearly specified. When SRFI 142 was written, the specification was clarified to process bits from least significant to most significant, so that (integer->list 6) => (#f #t #t). However, the SLIB and SRFI 60 implementation processed them from the most significant bit to the least-significant bit, so that (integer->list 6) => (#t #t #f). This SRFI retains the little-endian order, but renames the procedures to bits->list and list->bits to avoid a silent breaking change from SLIB and SRFI 60. The same is true of the closely analogous integer->vector, vector->integer, and bits procedures.

Specification

Procedure index

   bitwise-not
   bitwise-and   bitwise-ior
   bitwise-xor   bitwise-eqv
   bitwise-nand  bitwise-nor
   bitwise-andc1 bitwise-andc2
   bitwise-orc1  bitwise-orc2
   
   arithmetic-shift bit-count
   integer-length bitwise-if
   
   bit-set? copy-bit bit-swap
   any-bit-set? every-bit-set?
   first-set-bit
   
   bit-field bit-field-any? bit-field-every?
   bit-field-clear bit-field-set
   bit-field-replace  bit-field-replace-same
   bit-field-rotate bit-field-reverse
   
   bits->list list->bits bits->vector vector->bits
   bits
   bitwise-fold bitwise-for-each bitwise-unfold
   make-bitwise-generator

In the following procedure specifications all parameters and return values are exact integers unless otherwise indicated (except that procedures with names ending in ? are predicates, as usual). It is an error to pass values of other types as arguments to these functions.

Bitstrings are represented by exact integers, using a two's-complement encoding of the bitstring. Thus every integer represents a semi-infinite bitstring, having either a finite number of zeros (negative integers) or a finite number of ones (non-negative integers). The bits of a bitstring are numbered from the rightmost/least-significant bit: bit #0 is the rightmost or 2⁰ bit, bit #1 is the next or 2¹ bit, and so forth.

Basic operations

bitwise-not iprocedure

Returns the bitwise complement of i; that is, all 1 bits are changed to 0 bits and all 0 bits to 1 bits.

  (bitwise-not 10) => -11
  (bitwise-not -37) => 36

The following ten procedures correspond to the useful set of non-trivial two-argument boolean functions. For each such function, the corresponding bitwise operator maps that function across a pair of bitstrings in a bit-wise fashion. The core idea of this group of functions is this bitwise "lifting" of the set of dyadic boolean functions to bitstring parameters.

bitwise-and iprocedure

bitwise-ior iprocedure

bitwise-xor iprocedure

bitwise-eqv iprocedure

These operations are associative. When passed no arguments, the procedures return the identity values -1, 0, 0, and -1 respectively.

The bitwise-eqv procedure produces the complement of the bitwise-xor procedure. When applied to three arguments, it does not produce a 1 bit everywhere that a, b and c all agree. That is, it does not produce

     (bitwise-ior (bitwise-and a b c)
                  (bitwise-and (bitwise-not a)
                               (bitwise-not b)
                               (bitwise-not c)))

Rather, it produces (bitwise-eqv a (bitwise-eqv b c)) or the equivalent (bitwise-eqv (bitwise-eqv a b) c).

      (bitwise-ior 3  10)     =>  11
      (bitwise-and 11 26)     =>  10
      (bitwise-xor 3 10)      =>   9
      (bitwise-eqv 37 12)     => -42
      (bitwise-and 37 12)     =>   4

bitwise-nand i jprocedure

bitwise-nor i jprocedure

bitwise-andc1 i jprocedure

bitwise-andc2 i jprocedure

bitwise-orc1 i jprocedure

bitwise-orc2 i jprocedure

These operations are not associative.

      (bitwise-nand 11 26) =>  -11
      (bitwise-nor  11 26) => -28
      (bitwise-andc1 11 26) => 16
      (bitwise-andc2 11 26) => 1
      (bitwise-orc1 11 26) => -2
      (bitwise-orc2 11 26) => -17

Integer operations

arithmetic-shift i countprocedure

Returns the arithmetic left shift when count>0; right shift when count < 0.

    (arithmetic-shift 8 2) => 32
    (arithmetic-shift 4 0) => 4
    (arithmetic-shift 8 -1) => 4
    (arithmetic-shift -100000000000000000000000000000000 -100) => -79

bit-count iprocedure

Returns the population count of 1's (i >= 0) or 0's (i < 0). The result is always non-negative.

Compatibility note: The R6RS analogue bitwise-bit-count applies bitwise-not to the population count before returning it if i is negative.

    (bit-count 0) =>  0
    (bit-count -1) =>  0
    (bit-count 7) =>  3
    (bit-count  13) =>  3 ;Two's-complement binary: ...0001101
    (bit-count -13) =>  2 ;Two's-complement binary: ...1110011
    (bit-count  30) =>  4 ;Two's-complement binary: ...0011110
    (bit-count -30) =>  4 ;Two's-complement binary: ...1100010
    (bit-count (expt 2 100)) =>  1
    (bit-count (- (expt 2 100))) =>  100
    (bit-count (- (1+ (expt 2 100)))) =>  1

integer-length iprocedure

The number of bits needed to represent i, i.e.

   (ceiling (/ (log (if (negative? integer)
                             (- integer)
                             (+ 1 integer)))
                    (log 2)))

The result is always non-negative.

For non-negative i, this is the number of bits needed to represent i in an unsigned binary representation. For all i, (+ 1 (integer-length i)) is the number of bits needed to represent i in a signed twos-complement representation.

    (integer-length  0) => 0
    (integer-length  1) => 1
    (integer-length -1) => 0
    (integer-length  7) => 3
    (integer-length -7) => 3
    (integer-length  8) => 4
    (integer-length -8) => 3

bitwise-if mask i jprocedure

Merge the bitstrings i and j, with bitstring mask determining from which string to take each bit. That is, if the kth bit of mask is 1, then the kth bit of the result is the kth bit of i, otherwise the kth bit of j.

    (bitwise-if 3 1 8) => 9
    (bitwise-if 3 8 1) => 0
    (bitwise-if 1 1 2) => 3
    (bitwise-if #b00111100 #b11110000 #b00001111) => #b00110011

Single-bit operations

As always, the rightmost/least-significant bit in i is bit 0.

bit-set? index iprocedure

Is bit index set in bitstring i (where index is a non-negative exact integer)?

Compatibility note: The R6RS analogue bitwise-bit-set? accepts its arguments in the opposite order.

    (bit-set? 1 1) =>  false
    (bit-set? 0 1) =>  true
    (bit-set? 3 10) =>  true
    (bit-set? 1000000 -1) =>  true
    (bit-set? 2 6) =>  true
    (bit-set? 0 6) =>  false

copy-bit index i booleanprocedure

Returns an integer the same as i except in the indexth bit, which is 1 if boolean is #t and 0 if boolean is #f.

Compatibility note: The R6RS analogue bitwise-copy-bit as originally documented has a completely different interface. (bitwise-copy-bit dest index source) replaces the index'th bit of dest with the index'th bit of source. It is equivalent to (bit-field-replace-same dest source index (+ index 1)). However, an erratum made a silent breaking change to interpret the third argument as 0 for a false bit and 1 for a true bit. Some R6RS implementations applied this erratum but others did not.

(copy-bit 0 0 #t) => #b1
(copy-bit 2 0 #t) => #b100
(copy-bit 2 #b1111 #f) => #b1011

bit-swap index1 index2 iprocedure

Returns an integer the same as i except that the index1th bit and the index2th bit have been exchanged.

(bit-swap 0 2 4) => #b1

any-bit-set? test-bits iprocedure

every-bit-set? test-bits iprocedure

Determines if any/all of the bits set in bitstring test-bits are set in bitstring i. I.e., returns (not (zero? (bitwise-andtest-bits i))) and (= test-bits (bitwise-and test-bits i))) respectively.

    (any-bit-set? 3 6) => #t
    (any-bit-set? 3 12) => #f
    (every-bit-set? 4 6) => #t
    (every-bit-set? 7 6) => #f

first-set-bit iprocedure

Return the index of the first (smallest index) 1 bit in bitstring i. Return -1 if i contains no 1 bits (i.e., if i is zero).

    (first-set-bit 1) => 0
    (first-set-bit 2) => 1
    (first-set-bit 0) => -1
    (first-set-bit 40) => 3
    (first-set-bit -28) => 2
    (first-set-bit (expt  2 99)) => 99
    (first-set-bit (expt -2 99)) => 99

Bit field operations

These functions operate on a contiguous field of bits (a "byte," in Common Lisp parlance) in a given bitstring. The start and end arguments, which are not optional, are non-negative exact integers specifying the field: it is the end-start bits running from bit start to bit end-1.

bit-field i start endprocedure

Returns the field from i, shifted down to the least-significant position in the result.

   (bit-field #b1101101010 0 4) => #b1010
   (bit-field #b1101101010 3 9) => #b101101
   (bit-field #b1101101010 4 9) => #b10110
   (bit-field #b1101101010 4 10) => #b110110
   (bit-field 6 0 1) => 0
   (bit-field 6 1 3) => 3
   (bit-field 6 2 999) => 1
   (bit-field #x100000000000000000000000000000000 128 129) => 1

bit-field-any? i start endprocedure

Returns true if any of the field's bits are set in bitstring i, and false otherwise.

  (bit-field-any? #b1001001 1 6) => #t
  (bit-field-any? #b1000001 1 6) => #f

bit-field-every? i start endprocedure

Returns false if any of the field's bits are not set in bitstring i, and true otherwise.

  (bit-field-every? #b1011110 1 5) => #t
  (bit-field-every? #b1011010 1 5) => #f

bit-field-clear i start endprocedure

bit-field-set i start endprocedure

Returns i with the field's bits set to all 0s/1s.

   (bit-field-clear #b101010 1 4) => #b100000
   (bit-field-set #b101010 1 4) => #b101110

bit-field-replace dest source start endprocedure

Returns dest with the field replaced by the least-significant end-start bits in source.

   (bit-field-replace #b101010 #b010 1 4) => #b100100
   (bit-field-replace #b110 1 0 1) => #b111
   (bit-field-replace #b110 1 1 2) => #b110

bit-field-replace-same dest source start endprocedure

Returns dest with its field replaced by the corresponding field in source.

   (bit-field-replace-same #b1111 #b0000 1 3) => #b1001

bit-field-rotate i count start endprocedure

Returns i with the field cyclically permuted by count bits towards high-order.

Compatibility note: The R6RS analogue bitwise-rotate-bit-field uses the argument ordering i start end count.

   (bit-field-rotate #b110 0 0 10) => #b110
   (bit-field-rotate #b110 0 0 256) => #b110
   (bit-field-rotate #x100000000000000000000000000000000 1 0 129) => 1
   (bit-field-rotate #b110 1 1 2) => #b110
   (bit-field-rotate #b110 1 2 4) => #b1010
   (bit-field-rotate #b0111 -1 1 4) => #b1011

bit-field-reverse i start endprocedure

Returns i with the order of the bits in the field reversed.

   (bit-field-reverse 6 1 3) => 6
   (bit-field-reverse 6 1 4) => 12
   (bit-field-reverse 1 0 32) => #x80000000
   (bit-field-reverse 1 0 31) => #x40000000
   (bit-field-reverse 1 0 30) => #x20000000
   (bit-field-reverse #x140000000000000000000000000000000 0 129) => 5

Bits conversion

bits->list i #!optional lenprocedure

bits->vector i #!optional lenprocedure

Returns a list/vector of len booleans corresponding to each bit of the non-negative integer i, returning bit #0 as the first element, bit #1 as the second, and so on. #t is returned for each 1; #f for 0.

   (bits->list #b1110101)) => (#t #f #t #f #t #t #t)
   (bits->list 3 5)) => (#t #t #f #f #f)
   (bits->list 6 4)) => (#f #t #t #f)

   (bits->vector #b1110101)) => #(#t #f #t #f #t #t #t)

list->bits listprocedure

vector->bits vectorprocedure

Returns an integer formed from the booleans in list/vector, using the first element as bit #0, the second element as bit #1, and so on. It is an error if list/vector contains non-booleans. A 1 bit is coded for each #t; a 0 bit for #f. Note that the result is never a negative integer.

   (list->bits '(#t #f #t #f #t #t #t)) => #b1110101
   (list->bits '(#f #f #t #f #t #f #t #t #t)) => #b111010100
   (list->bits '(#f #t #t)) => 6
   (list->bits '(#f #t #t #f)) => 6
   (list->bits '(#f #f #t #t)) => 12

   (vector->bits '#(#t #f #t #f #t #t #t)) => #b1110101
   (vector->bits '#(#f #f #t #f #t #f #t #t #t)) => #b111010100
   (vector->bits '#(#f #t #t)) => 6
   (vector->bits '#(#f #t #t #f)) => 6
   (vector->bits '#(#f #f #t #t)) => 12

For positive integers, bits->list and list->bits are inverses in the sense of equal?, and so are bits->vector and vector->bits.

bits bool ...procedure

Returns the integer coded by the bool arguments. The first argument is bit #0, the second argument is bit #1, and so on. Note that the result is never a negative integer.

  (bits #t #f #t #f #t #t #t) => #b1110101
  (bits #f #f #t #f #t #f #t #t #t) => #b111010100

Fold, unfold, and generate

It is an error if the arguments named proc, stop?, mapper, successor are not procedures. The arguments named seed may be any Scheme object.

bitwise-fold proc seed iprocedure

For each bit b of i from bit #0 (inclusive) to bit (integer-length i) (exclusive), proc is called as (proc b r), where r is the current accumulated result. The initial value of r is seed, and the value returned by proc becomes the next accumulated result. When the last bit has been processed, the final accumulated result becomes the result of bitwise-fold.

  (bitwise-fold cons '() #b1010111) => (#t #f #t #f #t #t #t)

bitwise-for-each proc iprocedure

Repeatedly applies proc to the bits of i starting with bit #0 (inclusive) and ending with bit (integer-length i) (exclusive). The values returned by proc are discarded. Returns an unspecified value.

      (let ((count 0))
        (bitwise-for-each (lambda (b) (if b (set! count (+ count 1))))
                          #b1010111)
       count)

bitwise-unfold stop? mapper successor seedprocedure

Generates a non-negative integer bit by bit, starting with bit 0. If the result of applying stop? to the current state (whose initial value is seed) is true, return the currently accumulated bits as an integer. Otherwise, apply mapper to the current state to obtain the next bit of the result by interpreting a true value as a 1 bit and a false value as a 0 bit. Then get a new state by applying successor to the current state, and repeat this algorithm.

  (bitwise-unfold (lambda (i) (= i 10))
                  even?
                  (lambda (i) (+ i 1))
                  0)) => #b101010101

make-bitwise-generator iprocedure

Returns a SRFI 121 generator that generates all the bits of i starting with bit #0. Note that the generator is infinite.

  (let ((g (make-bitwise-generator #b110)))
    (test #f (g))
    (test #t (g))
    (test #t (g))
    (test #f (g)))

Implementation

The implementation is in the repository of this SRFI, and includes the following files:

bitwise-core.scm - the SRFI 60 sample implementation of the seven core operators, without dependencies
bitwise-33.scm - SRFI 33 sample implementation, some procedures renamed
bitwise-60.scm - part of SRFI 60 sample implementation, some procedures renamed
bitwise-other.scm - implementation of other procedures
srfi-151.scm - Chicken module
srfi-151.sld - R7RS library
chibi-test.scm - Chibi tests
chicken-test.scm - Chicken tests

It is very important for performance to provide a C or assembly implementation of the core operators. There is a cond-expand in srfi-151.sld that can be extended to take advantage of this. Currently it contains options for Chibi and Gauche. In addition, if the R6RS library (rnrs arithmetic bitwise) is available, it will be used in place of bitwise-core.scm.

Temporary note: Chibi assumes a C library named bit. The bit.{so,dll} file can be found in $PREFIX/lib/chibi/srfi/{33,142}. Even more temporary note: this is buggy, so the Chibi arm of the conditional is currently commented out.

Comparison of proposals

The following table compares the names of the bitwise (aka logical) functions of Common Lisp, SRFI 33, Olin's revisions, SRFI 60, R6RS, and this SRFI. ''Italic procedure names'' indicate that the equivalence is only rough: argument orderings or precise semantics are not the same as in this SRFI.

Function	CL	SRFI 33	SRFI 33 late revs	SRFI 60	R6RS	This SRFI
Bitwise NOT	`lognot`	`bitwise-not`	`bitwise-not`	`lognot`, `bitwise-not`	`bitwise-not`	`bitwise-not`
Bitwise AND	`logand`	`bitwise-and`	`bitwise-and`	`logand`, `bitwise-and`	`bitwise-and`	`bitwise-and`
Bitwise IOR	`logior`	`bitwise-ior`	`bitwise-ior`	`logior`, `bitwise-ior`	`bitwise-ior`	`bitwise-ior`
Bitwise XOR	`logxor`	`bitwise-xor`	`bitwise-xor`	`logxor`, `bitwise-xor`	`bitwise-xor`	`bitwise-xor`
Bitwise EQV	`logeqv`	`bitwise-eqv`	`bitwise-eqv`	---	---	`bitwise-eqv`
Bitwise NAND	`lognand`	`bitwise-nand`	`bitwise-nand`	---	---	`bitwise-nand`
Bitwise NOR	`lognor`	`bitwise-nor`	`bitwise-nor`	---	---	`bitwise-nor`
Bitwise AND with NOT of first arg	`logandc1`	`bitwise-andc1`	`bitwise-andc1`	---	---	`bitwise-andc1`
Bitwise AND with NOT of second arg	`logandc2`	`bitwise-andc2`	`bitwise-andc2`	---	---	`bitwise-andc2`
Bitwise OR with NOT of first arg	`logorc1`	`bitwise-orc1`	`bitwise-orc1`	---	---	`bitwise-orc1`
Bitwise OR with NOT of second arg	`logorc2`	`bitwise-orc2`	`bitwise-orc2`	---	---	`bitwise-orc2`
Arithmetic shift	`ash`	`arithmetic-shift`	`arithmetic-shift`	`ash`, `arithmetic-shift`	`bitwise-arithmetic-shift`	`arithmetic-shift`
Population count	`logcount`	`bit-count`	`bit-count`	`logcount`, `bit-count`	`bitwise-bit-count`	`bit-count`
Integer length	`integer-length`	`integer-length`	`integer-length`	`integer-length`	`bitwise-length`	`integer-length`
Mask selects source of bits	---	`bitwise-merge`	`bitwise-merge`	`bitwise-if`, `bitwise-merge`	`bitwise-if`	`bitwise-if`
Test single bit	`logbitp`	`bit-set?`	`bit-set?`	`logbit?`, `bit-set?`	`bitwise-bit-set?`	`bit-set?`
See if any mask bits set	`logtest`	`any-bits-set?`	`any-bit-set?`	`logtest`, `any-bits-set?`	---	`any-bit-set?`
See if all mask bits set	---	`all-bits-set?`	`every-bit-set?`	---	---	`every-bit-set?`
Replace single bit	---	---	`copy-bit`	`copy-bit`	`bitwise-copy-bit`	`copy-bit`
Swap bits	---	---	---	---	---	`bit-swap`
Find first bit set	---	`first-set-bit`	`first-set-bit`	`log2-binary-factors`, `first-set-bit`	`bitwise-first-bit-set`	`first-set-bit`
Extract bit field	ldb	`extract-bit-field`	`extract-bit-field`	`bit-field`	`bitwise-bit-field`	`bit-field`
Test bit field (any)	`ldb-test`	`test-bit-field?`	`bit-field-any?`	---	---	`bit-field-any?`
Test bit field (every)	---	---	`bit-field-every?`	---	---	`bit-field-every?`
Clear bit field	`mask-field`	`clear-bit-field`	`bit-field-clear`	---	---	`bit-field-clear`
Set bit field	---	---	---	---	---	`bit-field-set`
Replace bit field	`dpb`	`replace-bit-field`	`bit-field-replace`	`copy-bit-field`	`bitwise-copy-bit-field`	`bit-field-replace`
Replace corresponding bit field	`deposit-field`	`copy-bit-field`	`bit-field-copy`	---	---	`bit-field-replace-same`
Rotate bit field	---	---	---	`rotate-bit-field`	`bitwise-rotate-bit-field`	`bit-field-rotate`
Reverse bit field	---	---	---	`reverse-bit-field`	`bitwise-reverse-bit-field`	`bit-field-reverse`
Bits to boolean list	---	---	---	`integer->list`	---	`bits->list`
Bits to boolean vector	---	---	---	---	---	`bits->vector`
Boolean list to bits	---	---	---	`list->integer`	---	`list->bits`
Boolean vector to bits	---	---	---	---	---	`vector->bits`
Booleans to integer	---	---	---	`booleans->integer`	---	`bits`
Bitwise fold	---	---	---	---	---	`bitwise-fold`
Bitwise for-each	---	---	---	---	---	`bitwise-for-each`
Bitwise unfold	---	---	---	---	---	`bitwise-unfold`
Bit generator	---	---	---	---	---	`make-bitwise-generator`

Removed SRFI files which are not needed for the egg (e.g. html markup)

1.0.1

Changed egg license to MIT

1.0.0

Initial release of SRFI-151 as a CHICKEN egg

Copyright

 Copyright (C) John Cowan (2016).  All Rights Reserved.
 
 Permission is hereby granted, free of charge, to any person
 obtaining a copy of this software and associated documentation files
 (the "Software"), to deal in the Software without restriction,
 including without limitation the rights to use, copy, modify, merge,
 publish, distribute, sublicense, and/or sell copies of the Software,
 and to permit persons to whom the Software is furnished to do so,
 subject to the following conditions:
 
 The above copyright notice and this permission notice shall be
 included in all copies or substantial portions of the Software.
 
 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 SOFTWARE.

chickadee » srfi-151

Identifier search