## SRFI-94: Type-Restricted Numerical Functions

### Abstract

In the coding of numerial calculations in latent-typed languages it is good practice to assure that those calculations are using the intended number system. The most common number systems for programmatic calculations are the integers, reals, and complexes. This SRFI introduces 14 real-only and 3 integer-only variants of R5RS procedures to facilitate numerical type checking and declaration.

For more information see: SRFI-94: Type-Restricted Numerical Functions

### Issues

With the exception of `=` and `zero?`, Scheme's numerical comparison operators are already restricted to real numbers.

The larger question is whether to make integer-only versions of `=`, `zero?`, `<`, `>`, `<=`, `>=`, `positive?`, and `negative?`. (`odd?` and `even?` are already integer-only).

Because `quotient`, `modulo`, and `remainder` constrain both their inputs and outputs, and because `vector-ref`, `vector-set!`, `string-ref`, `string-set!`, `list-ref`, `list-tail`, `odd?`, and `even?` constrain one of their inputs as integers, I think that integer-only comparison operators are not needed.

### Terminology

Use of the terms integer, real, and complex follows R5RS and SRFI-70. All integers are real; all reals are complex.

### Rationale

The infinities introduced by SRFI-70 extend the range of Scheme numerical calculations. But with that larger range, the signaling of numerical errors resulting from bad inputs or mistakes in program logic is delayed, and sometimes missed entirely.

The SRFI-77 shotgun approach creates type-restricted variants of all the numerical operations, but does not allow those operations to signal errors when they are forced out of bounds! For instance `flsqrt` and `inexact-sqrt`:

Returns the principal square root of `z` [sic]. For a negative argument, the result may be a `NaN`, or may be some meaningless flonum.

SRFI-77 here misses an opportunity to increase the declarative power of Scheme numerical operations. By the present SRFI making `real-sqrt` and `real-ln` of negative numbers an error, compilers can deduce that the expressions calculating the inputs to `real-sqrt` and `real-ln` must return non-negative reals. Similarly, use of the other real-only transcendental functions declares their inputs and outputs to be real.

For addition, subtraction, negation, and multiplication, the results of the operation will be members of the same number system as the operation's inputs when those inputs are all of the same number system. It would be unnecessary tedium to apply run-time tests to intermediate or final results of chains of these common operations.

Division of reals yields a real; division of complexes yields a complex. So real and complex division also need not be distinguished. `max` of integers yields an integer; and `max` of reals yields a real. So these are not distinguished; neither is `min`.

But division of integers can yield a non-integer. To address this, R5RS defines a division operator, `quotient`, which is specified only for integer arguments. This SRFI mandates that `quotient`, `remainder`, and `modulo` signal an error when passed an argument which is not an exact-integer.

The criterion is exact-integer instead of just integer so that the results of integer calculations are guaranteed to be of the correct type to pass as index arguments.

Arithmetic operations on mixtures of integer, real, and complex numbers are well defined and very common in use. This SRFI does not alter R5RS behavior of arithmetic operations with mixed type inputs.

This SRFI introduces some integer-only and real-only variants of the transcendental functions of R5RS. Those type-restricted functions are mandated to signal an error if called with arguments or producing results which are not in the designated number system. Thus `(real-sqrt -1)` must signal an error even though -1 is an exact real. Following SRFI-70, `#+inf.0` and `#-inf.0` are real; `NaN`s are not. None of these infinities is an integer.

The complex transcendental functions from R5RS are unchanged by this SRFI. They accept complex (hence also integer and real) arguments. The functions `abs`, `make-rectangular`, and `make-polar`; and `atan` when called with two arguments are changed to require them to signal an error when passed a non-real number. Note that integers are real numbers.

Although the language of this SRFI calls for error signaling, that signaling is not limited to run-time. An error can be reported during compilation. Run-time type testing can be skipped if the compiler can prove that arguments are of the correct type and within the correct range. It would be reasonable for SRFI-77's "unsafe mode" to disable run-time checking.

+----------------------------------+ | single argument | |----------------------------------| |Exact-integer | Real | Complex | |--------------+---------+---------| | |real-exp |exp | |--------------+---------+---------| | |real-ln |ln | |--------------+---------+---------| | |real-atan|atan | |--------------+---------+---------| | |real-acos|acos | |--------------+---------+---------| | |real-asin|asin | |--------------+---------+---------| | |real-tan |tan | |--------------+---------+---------| | |real-cos |cos | |--------------+---------+---------| | |real-sin |sin | |--------------+---------+---------| |abs |abs |magnitude| |--------------+---------+---------| |integer-sqrt |real-sqrt|sqrt | +----------------------------------+

+--------------------------------+ | multi-argument | |--------------------------------| |Exact-integer | Real |Complex| |--------------+---------+-------| |integer-expt |real-expt|expt | |--------------+---------+-------| |integer-log |real-log | | |--------------+---------+-------| | |atan | | |--------------+---------+-------| |+ |+ |+ | |--------------+---------+-------| |- |- |- | |--------------+---------+-------| |* |* |* | |--------------+---------+-------| | |/ |/ | |--------------+---------+-------| |quotient |quo | | |--------------+---------+-------| |modulo |mod | | |--------------+---------+-------| |remainder |rem | | |--------------+---------+-------| |max |max | | |--------------+---------+-------| |min |min | | +--------------------------------+

The `arithmetic-shift` and `integer-length` procedures of SRFI-60 are related to the base-2 exponential and logarithm respectively, but are not included in the table.

`mod` and `rem` are the real functions from Common-Lisp. `quo` is the analogous division `(truncate (/ x1 x2))`.

Although not a type-restricted function, `ln` is added as a synonym for `log` because `log` is not used consistently to denote the natural logarithm.

`Real-log` returns the logarithm of its second argument using its first argument as the base. `integer-log` is the analogous two-argument logarithm function for integers.

### Specification

`real-exp`procedure

`real-ln`procedure

`real-log`procedure

`real-sin`procedure

`real-cos`procedure

`real-tan`procedure

`real-asin`procedure

`real-acos`procedure

`real-atan`procedure

`atan`procedureThese procedures are part of every implementation that supports general real numbers; they compute the usual transcendental functions.

`Real-ln`computes the natural logarithm of`x`(not the base ten logarithm);`real-log`computes the logarithm of`x`base`y`, which is (/ (real-ln x) (real-ln y)) If arguments`x`and`y`are not both real; or if the correct result would not be real, then these procedures signal an error.

`real-sqrt`procedureFor non-negative real

`x`the result will be its positive square root; otherwise an error will be signaled.

`integer-sqrt`procedureFor non-negative integer

`n`returns the largest integer whose square is less than or equal to`n`; otherwise signals an error.

`integer-log`procedureReturns the largest exact integer whose power of

`k1`is less than or equal to`k2`. If`k1`or`k2`is not a positive exact integer, then integer-log signals an error.

`integer-expt`procedureReturns

`n1`raised to the power`n2`if that result is an exact integer; otherwise signals an error.(integer-expt 0 n2)

returns 1 for

`n2`equal to 0;returns 0 for positive integer

`n2`;signals an error otherwise.

`real-expt`procedureReturns

`x1`raised to the power`x2`if that result is a real number; otherwise signals an error.(real-expt 0.0 x2)

returns 1.0 for

`x2`equal to 0.0;returns 0.0 for positive real

`x2`;signals an error otherwise.

`quo`procedure

`rem`procedure

`mod`procedure`x2`should be non-zero.(quo x1 x2) ==> n_q (rem x1 x2) ==> x_r (mod x1 x2) ==> x_m

where n_q is x1/x2 rounded towards zero,

`0 < |x_r| < |x2|, 0 < |x_m| < |x2|, x_r and x_m`differ from`x1`by a multiple of`x2`,`x_r`has the same sign as`x1`, and`x_m`has the same sign as`x2`.From this we can conclude that for

`x2`not equal to 0,(= x1 (+ (* x2 (quo x1 x2)) (rem x1 x2))) ==> #t

provided all numbers involved in that computation are exact.

(quo 2/3 1/5) ==> 3 (mod 2/3 1/5) ==> 1/15 (quo .666 1/5) ==> 3.0 (mod .666 1/5) ==> 65.99999999999995e-3

`ln`procedureThese procedures are part of every implementation that supports general real numbers.

`Ln`computes the natural logarithm of z.In general, the mathematical function

`ln`is multiply defined. The value of`ln z`is defined to be the one whose imaginary part lies in the range from`-pi`(exclusive) to`pi`(inclusive).

#### Note

The specification of two-argument `atan` above and the following six procedures are changed from R5RS.

Additions and changes are marked in red.

`make-rectangular`procedure

`make-polar`procedureThese procedures are part of every implementation that supports general complex numbers. Suppose

`x1`,`x2`,`x3`, and`x4`are real numbers and z is a complex number such thatz = x1 + i x2 = x3 e^i x4

Then

(make-rectangular x1 x2) ==> z (make-polar x3 x4) ==> z

where

`-pi < x_angle <= pi`with`x_angle = x4 + 2pi n`for some integer`n`.If an argument is not real, then these procedures signal an error.

`abs`procedureFor real argument

`x`,`abs`returns the absolute value of`x`; otherwise it signals an error.(abs -7) ==> 7

`quotient`procedure

`remainder`procedure

`modulo`procedureThese procedures implement number-theoretic (integer) division. If

`n1`is not an exact integer, or if`n2`is not an exact non-zero integer, an error is signaled. All three procedures return exact integers. If`n1/n2`is an integer:(quotient n1 n2) ==> n1/n2 (remainder n1 n2) ==> 0 (modulo n1 n2) ==> 0

If

`n1/n2`is not an integer:(quotient n1 n2) ==> n_q (remainder n1 n2) ==> x_r (modulo n1 n2) ==> x_m

where

`n_q`is`n1/n2`rounded towards zero,`0 < |x_r| < |n2|, 0 < |x_m| < |n2|, x_r`and`x_m`differ from`n1`by a multiple of`n2`,`x_r`has the same sign as`n1`, and`x_m`has the same sign as`n2`.From this we can conclude that for integers

`n1`and`n2`with`n2`not equal to 0,(= n1 (+ (* n2 (quotient n1 n2)) (remainder n1 n2))) ==> #t

(modulo 13 4) ==> 1 (remainder 13 4) ==> 1 (modulo -13 4) ==> 3 (remainder -13 4) ==> -1 (modulo 13 -4) ==> -3 (remainder 13 -4) ==> 1 (modulo -13 -4) ==> -1 (remainder -13 -4) ==> -1

### Author

- Aubrey Jaffer
- Ported to Chicken Scheme 5 by Sergey Goldgaber

### Repository

https://github.com/diamond-lizard/srfi-94

### Copyright

Copyright (C) Aubrey Jaffer 2006. All Rights Reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

### Version history

- 0.1 - Ported to Chicken Scheme 5