## Outdated egg!

This is an egg for CHICKEN 4, the unsupported old release. You're almost certainly looking for the CHICKEN 5 version of this egg, if it exists.

If it does not exist, there may be equivalent functionality provided by another egg; have a look at the egg index. Otherwise, please consider porting this egg to the current version of CHICKEN.

## SRFI-116: Immutable Lists

Scheme currently does not provide immutable pairs corresponding to its existing mutable pairs, although most uses of pairs do not exploit their mutability. The Racket system takes the radical approach of making Scheme's pairs immutable, and providing a minimal library of mutable pairs with procedures named `mpair?`, `mcons`, `mcar`, `mcdr`, `set-mcar!`, `set-mcdr!`. This SRFI takes the opposite approach of leaving Scheme's pairs unchanged and providing a full set of routines for creating and dealing with immutable pairs. The sample implementation is portable (to systems with SRFI 9) and efficient.

## TOC »

## Installation

$ chicken-install srfi-116

or

$ chicken-install srfi-116 -test

if you want to run the tests for the egg in addition.

## SRFI Description

For a full description of this SRFI, see the full SRFI document. This documentation covers the API only.

## Immutable Lists

### Constructors

`ipair``a``d`procedureThe primitive constructor. Returns a newly allocated ipair whose icar is

`a`and whose icdr is`d`. The ipair is guaranteed to be different (in the sense of`eqv?`) from every existing object.(ipair 'a '()) ;=> (a) (ipair (iq a) (iq b c d)) ;=> ((a) b c d) (ipair "a" (iq b c)) ;=> ("a" b c) (ipair 'a 3) ;=> (a . 3) (ipair (iq a b) 'c) ;=> ((a b ) . c)

`ilist``obj``...`procedureReturns a newly allocated ilist of its arguments.

(ilist 'a (+ 3 4) 'c) ;=> (a 7 c) (ilist) ;=> ()

`xipair``d``a`procedure-
(lambda (d a) (ipair a d))

Of utility only as a value to be conveniently passed to higher-order procedures.

(xipair (iq b c) 'a) ;=> (a b c)

The name stands for "eXchanged Immutable PAIR."

`ipair*``elt1``elt2``...`procedureLike ilist, but the last argument provides the tail of the constructed ilist, returning

`(ipair elt1 (ipair elt2 (ipair ... eltn)))`(ipair* 1 2 3 4) ;=> (1 2 3 . 4) (ipair* 1) ;=> 1

`make-ilist``n``#!optional``fill`procedureReturns an

`n`-element ilist, whose elements are all the value fill. If the fill argument is not given, the elements of the ilist may be arbitrary values.(make-ilist 4 'c) ;=> (c c c c)

`ilist-tabulate``n``init-proc`procedureReturns an

`n`-element ilist. Element i of the ilist, where 0 <= i < n, is produced by`(init-proc i)`. No guarantee is made about the dynamic order in which`init-proc`is applied to these indices.(ilist-tabulate 4 values) ;=> (0 1 2 3)

`ilist-copy``dilist`procedureCopies the spine of the argument, including the ilist tail.

`iiota``count``#!optional``start``step`procedureReturns an ilist containing the elements:

(start start+step ... start+(count-1)*step)

The start and step parameters default to 0 and 1, respectively. This procedure takes its name from the APL primitive.

(iiota 5) ;=> (0 1 2 3 4) (iiota 5 0 -0.1) ;=> (0 -0.1 -0.2 -0.3 -0.4)

### Predicates

`proper-ilist?``x`procedure`ilist?``x`procedureThese identifiers are bound either to the same procedure, or to procedures of equivalent behavior. In either case, true is returned iff

`x`is a proper ilist — a ()-terminated ilist.More carefully: The empty list is a proper ilist. An ipair whose icdr is a proper ilist is also a proper ilist. Everything else is a dotted ilist. This includes non-ipair, non-() values (e.g. symbols, numbers, mutable pairs), which are considered to be dotted ilists of length 0.

`dotted-ilist?``x`procedureTrue if

`x`is a finite, non-nil-terminated ilist. That is, there exists an n >= 0 such that`(icdrn x)`is neither an ipair nor (). This includes non-ipair, non-() values (e.g. symbols, numbers), which are considered to be dotted ilists of length 0.(dotted-ilist? x) = (not (proper-ilist? x))

`ipair?``obj`procedureReturns

`#t`if object is an ipair; otherwise`#f`(ipair? (ipair 'a 'b)) ;=> #t (ipair? (iq a b c)) ;=> #t (ipair? (cons 1 2)) ;=> #f (ipair? '()) ;=> #f (ipair? '#(a b)) ;=> #f (ipair? 7) ;=> #f (ipair? 'a) ;=> #f

`null-ilist?``ilist`procedure`ilist`is a proper ilist. This procedure returns true if the argument is the empty list (), and false otherwise. It is an error to pass this procedure a value which is not a proper ilist. This procedure is recommended as the termination condition for ilist-processing procedures that are not defined on dotted ilists.

`not-ipair?``x`procedure-
(lambda (x) (not (ipair? x)))

Provided as a procedure as it can be useful as the termination condition for ilist-processing procedures that wish to handle all ilists, both proper and dotted.

`ilist=``elt=``ilist1``...`procedureDetermines ilist equality, given an element-equality procedure. Proper ilist A equals proper ilist B if they are of the same length, and their corresponding elements are equal, as determined by

`elt=`. If the element-comparison procedure's first argument is from ilisti, then its second argument is from ilisti+1, i.e. it is always called as`(elt= a b)`for a an element of ilist A, and b an element of ilist B.In the n-ary case, every ilisti is compared to ilisti+1 (as opposed, for example, to comparing ilist1 to ilisti, for i>1). If there are no ilist arguments at all,

`ilist=`simply returns true.It is an error to apply ilist= to anything except proper ilists. It cannot reasonably be extended to dotted ilists, as it provides no way to specify an equality procedure for comparing the ilist terminators.

Note that the dynamic order in which the

`elt=`procedure is applied to pairs of elements is not specified. For example, if`ilist=`is applied to three ilists, A, B, and C, it may first completely compare A to B, then compare B to C, or it may compare the first elements of A and B, then the first elements of B and C, then the second elements of A and B, and so forth.The equality procedure must be consistent with eq?. That is, it must be the case that

(eq? x y) ;=> (elt= x y).

Note that this implies that two ilists which are eq? are always ilist=, as well; implementations may exploit this fact to "short-cut" the element-by-element comparisons.

(ilist= eq?) ;=> #t ;Trivial cases (ilist= eq? (iq a)) ;=> #t

### Selectors

`icar``ipair`procedure`icdr``ipair`procedureThese procedures return the contents of the

`icar`and`icdr`field of their argument, respectively. Note that it is an error to apply them to the empty ilist.(icar (iq a b c)) ;=> a (icar (iq (a) b c d)) ;=> (a) (icar (ipair 1 2)) ;=> 1 (icar '()) ;=> *error* (icdr (iq a b c)) ;=> (b c) (icdr (iq (a) b c d)) ;=> (b c d) (icdr (ipair 1 2)) ;=> 2 (icdr '()) ;=> *error*

`icaar``ipair`procedure`icadr``ipair`procedure`icdddar``ipair`procedure`icddddr``ipair`procedureThese procedures are compositions of icar and icdr, where for example icaddr could be defined by:

(define icaddr (lambda (x) (icar (icdr (icdr x))))).

Arbitrary compositions, up to four deep, are provided. There are twenty-eight of these procedures in all.

`ilist-ref``ilist``i`procedureReturns the ith element of ilist. (This is the same as the icar of (idrop ilist i).) It is an error if i >= n, where n is the length of ilist.

(ilist-ref (iq a b c d) 2) ;=> c

`ifirst``ipair`procedure`isecond``ipair`procedure`ithird``ipair`procedure`ifourth``ipair`procedure`ififth``ipair`procedure`isixth``ipair`procedure`iseventh``ipair`procedure`ieigth``ipair`procedure`ininth``ipair`procedure`itenth``ipair`procedureSynonyms for car, cadr, caddr, ...

(ithird '(a b c d e)) ;=> c

<procedure>(icar+icdr ipair)<procedure>

The fundamental ipair deconstructor:

(lambda (p) (values (icar p) (icdr p)))

This can, of course, be implemented more efficiently by a compiler.

`itake``x``i`procedure`idrop``x``i`procedure`ilist-tail``x``i`procedure`itake`returns the first`i`elements of ilist`x`.`idrop`returns all but the first`i`elements of ilist`x`.`ilist-tail`is either the same procedure as`idrop`or else a procedure with the same behavior.(itake (iq a b c d e) 2) ;=> (a b) (idrop (iq a b c d e) 2) ;=> (c d e)

`x`may be any value — a proper or dotted ilist:(itake (ipair 1 (ipair 2 (ipair 3 'd))) ;=> (1 2) (idrop (ipair 1 (ipair 2 (ipair 3 'd))) 2) ;=> (3 . d) (itake (ipair 1 (ipair 2 (ipair 3 'd))) 3) ;=> (1 2 3) (idrop (ipair 1 (ipair 2 (ipair 3 'd))) 3) ;=> d

For a legal

`i`,`itake`and`idrop`partition the ilist in a manner which can be inverted with`iappend`:(iappend (itake x i) (idrop x i)) = x

`idrop`is exactly equivalent to performing`i``icdr`operations on`x`; the returned value shares a common tail with`x`.

`itake-right``dilist``i`procedure`idrop-right``dilist``i`procedure`itake-right`returns the last`i`elements of dilist.`idrop-right`returns all but the last`i`elements of dilist.(itake-right (iq a b c d e) 2) ;=> (d e) (idrop-right (iq a b c d e) 2) ;=> (a b c)

The returned ilist may share a common tail with the argument ilist.

`dilist`may be any ilist, either proper or dotted:(itake-right (iq ipair 1 (ipair 2 (ipair 3 'd))) 2) ;=> (2 3 . d) (idrop-right (ipair 1 (ipair 2 (ipair 3 'd))) 2) ;=> (1) (itake-right (ipair 1 (ipair 2 (ipair 3 'd))) 0) ;=> d (idrop-right (ipair 1 (ipair 2 (ipair 3 'd))) 0) ;=> (1 2 3)

For a legal

`i`,`itake-right`and`idrop-right`partition the ilist in a manner which can be inverted with`iappend`:(iappend (itake dilist i) (idrop dilist i)) ;=> dilist

`itake-right`'s return value is guaranteed to share a common tail with`dilist`.

`isplit-at``x``i`procedure`isplit-at`splits the ilist`x`at index`i`, returning an ilist of the first`i`elements, and the remaining tail. It is equivalent to(values (itake x i) (idrop x i))

`ilast``ipair`procedure`last-ipair``ipair`procedureReturns the last element of the non-empty, possibly dotted, ilist

`ipair`.`last-ipair`returns the last ipair in the non-empty ilist`pair`.(ilast (iq a b c)) ;=> c (last-ipair (iq a b c)) ;=> (c)

### Miscellaneous

`ilength``ilist`procedureReturns the length of its argument. It is an error to pass a value to

`ilength`which is not a proper ilist (()-terminated).The length of a proper ilist is a non-negative integer n such that

`icdr`applied n times to the ilist produces the empty list.

`iappend``ilist1``...`procedureReturns an ilist consisting of the elements of

`ilist1`followed by the elements of the other ilist parameters.(iappend (iq x) (iq y)) ;=> (x y) (iappend (iq a) (iq b c d)) ;=> (a b c d) (iappend (iq a (b)) (iq (c))) ;=> (a (b) (c))

The resulting ilist is always newly allocated, except that it shares structure with the final ilisti argument. This last argument may be any value at all; an improper ilist results if it is not a proper ilist. All other arguments must be proper ilists.

(iappend (iq a b) (ipair 'c 'd)) ;=> (a b c . d) (iappend '() 'a) ;=> a (iappend (iq x y)) ;=> (x y) (iappend) ;=> ()

`iconcatenate``ilist-of-ilists`procedureAppends the elements of its argument together. That is,

`iconcatenate`returns(iapply iappend ilist-of-ilists)

or, equivalently,

(ireduce-right iappend '() ilist-of-ilists)

Note that some Scheme implementations do not support passing more than a certain number (e.g., 64) of arguments to an n-ary procedure. In these implementations, the

`(iapply iappend ...)`idiom would fail when applied to long lists, but`iconcatenate`would continue to function properly.As with

`iappend`, the last element of the input list may be any value at all.

`ireverse``ilist`procedureReturns a newly allocated ilist consisting of the elements of

`ilist`in reverse order.(ireverse (iq a b c)) ;=> (c b a) (ireverse (iq a (b c) d (e (f)))) ;=> ((e (f)) d (b c) a)

`iappend-reverse``rev-head``tail`procedure`iappend-reverse`returns`(iappend (ireverse rev-head) tail)`. It is provided because it is a common operation — a common list-processing style calls for this exact operation to transfer values accumulated in reverse order onto the front of another ilist, and because the implementation is significantly more efficient than the simple composition it replaces. (But note that this pattern of iterative computation followed by a reverse can frequently be rewritten as a recursion, dispensing with the reverse and iappend-reverse steps, and shifting temporary, intermediate storage from the heap to the stack, which is typically a win for reasons of cache locality and eager storage reclamation.)

`izip``ilist1``ilist2``...`procedure-
(lambda ilists (iapply imap ilist ilists))

If

`izip`is passed n ilists, it returns an ilist as long as the shortest of these ilists, each element of which is an n-element ilist comprised of the corresponding elements from the parameter ilists.(izip (iq one two three) (iq 1 2 3) (iq odd even odd even odd even odd even)) ;=> ((one 1 odd) (two 2 even) (three 3 odd)) (izip (iq 1 2 3)) ;=> ((1) (2) (3))

`iunzip1``ilist`procedure`iunzip2``ilist`procedure`iunzip3``ilist`procedure`iunzip4``ilist`procedure`iunzip5``ilist`procedure`iunzip1`takes an ilist of ilists, where every ilist must contain at least one element, and returns an ilist containing the initial element of each such ilist. That is, it returns`(imap icar ilists)`.`unzip2`takes an ilist of ilists, where every ilist must contain at least two elements, and returns two values: an ilist of the first elements, and an ilist of the second elements.`iunzip3`does the same for the first three elements of the ilists, and so forth.(iunzip2 (iq (1 one) (2 two) (3 three))) ;=> (1 2 3) ;=> (one two three)

`icount``pred``ilist1``ilist2``...`procedure`pred`is a procedure taking as many arguments as there are ilists and returning a single value. It is applied element-wise to the elements of the ilists, and a count is tallied of the number of elements that produce a true value. This count is returned.`count`is "iterative" in that it is guaranteed to apply`pred`to the ilist elements in a left-to-right order. The counting stops when the shortest ilist expires.(count even? (iq 3 1 4 1 5 9 2 5 6)) ;=> 3 (count < (iq 1 2 4 8) (iq 2 4 6 8 10 12 14 16)) ;=> 3

### Fold, unfold & map

`ifold``konx``knil``ilist1``ilist2``...`procedureThe fundamental ilist iterator.

First, consider the single ilist-parameter case. If ilist1 is (e1 e2 ... en), then this procedure returns

(kons en ... (kons e2 (kons e1 knil)) ... )

That is, it obeys the (tail) recursion

(ifold kons knil lis) ;=> (ifold kons (kons (icar lis) knil) (icdr lis)) (ifold kons knil '()) ;=> knil

Examples:

(ifold + 0 lis) ; Add up the elements of LIS. (ifold ipair '() lis) ; Reverse LIS. (ifold ipair tail rev-head) ; See APPEND-REVERSE. ;; How many symbols in LIS? (ifold (lambda (x count) (if (symbol? x) (+ count 1) count)) 0 lis) ;; Length of the longest string in LIS: (ifold (lambda (s max-len) (max max-len (string-length s))) 0 lis)

If n ilist arguments are provided, then the

`kons`function must take n+1 parameters: one element from each ilist, and the "seed" or fold state, which is initially`knil`. The fold operation terminates when the shortest ilist runs out of values:(ifold ipair* '() (iq a b c) (iq 1 2 3 4 5)) ;=> (c 3 b 2 a 1)

`ifold-right``kons``knil``ilist1``ilist2``...`procedureThe fundamental ilist recursion operator.

First, consider the single ilist-parameter case. If ilist1 is (e1 e2 ... en), then this procedure returns

(kons e1 (kons e2 ... (kons en knil)))

That is, it obeys the recursion

(ifold-right kons knil lis) ;=> (kons (icar lis) (ifold-right kons knil (icdr lis))) (ifold-right kons knil '()) ;=> knil

Examples:

(ifold-right ipair '() lis) ; Copy LIS. ;; Filter the even numbers out of LIS. (ifold-right (lambda (x l) (if (even? x) (ipair x l) l)) '() lis))

If n ilist arguments are provided, then the

`kons`procedure must take n+1 parameters: one element from each ilist, and the "seed" or fold state, which is initially`knil`. The fold operation terminates when the shortest ilist runs out of values:(ifold-right ipair* '() (iq a b c) (iq 1 2 3 4 5)) ;=> (a 1 b 2 c 3)

`ipair-fold``kons``knil``ilist1``ilist2``...`procedureAnalogous to fold, but

`kons`is applied to successive sub-ilists of the ilists, rather than successive elements — that is,`kons`is applied to the ipairs making up the lists, giving this (tail) recursion:(ipair-fold kons knil lis) ;=> (let ((tail (icdr lis))) ; (ipair-fold kons (kons lis knil) tail)) (ipair-fold kons knil '()) ;=> knil

Example:

(ipair-fold ipair '() (iq a b c)) ;=> ((c) (b c) (a b c))

`ipair-fold-right``kons``knil``ilist1``ilist2``...`procedureHolds the same relationship with {{ifold-right} that {ipair-fold} holds with {ifold}. Obeys the recursion

(ipair-fold-right kons knil lis) ;=> (kons lis (ipair-fold-right kons knil (icdr lis))) (ipair-fold-right kons knil '()) ;=> knil

Example:

(ipair-fold-right ipair '() (iq a b c)) ;=> ((a b c) (b c) (c))

`ireduce``f``ridentity``ilist`procedure`ireduce`is a variant of`ifold`.`ridentity`should be a "right identity" of the procedure`f`— that is, for any value x acceptable to`f`,(f x ridentity) ;=> x

ireduce has the following definition: If ilist is (), return ridentity; Otherwise, return

`(ifold f (icar ilist) (icdr ilist))`. In other words, we compute`(ifold f ridentity ilist)`.**Note**that`ridentity`is used only in the empty-list case. You typically use`ireduce`when applying`f`is expensive and you'd like to avoid the extra application incurred when`ifold`applies`f`to the head of`ilist`and the`identity`value, redundantly producing the same value passed in to`f`. For example, if`f`involves searching a file directory or performing a database query, this can be significant. In general, however,`ifold`is useful in many contexts where`ireduce`is not (consider the examples given in the`ifold`definition -- only one of the five folds uses a function with a right identity. The other four may not be performed with`ireduce`).;; take the max of an ilist of non-negative integers. (ireduce max 0 nums) ; i.e., (iapply max 0 nums)

`ireduce-right``f``ridentity``ilist`procedure`ireduce-right`is the`fold-right`variant of`ireduce`. It obeys the following definition:(ireduce-right f ridentity '()) ;=> ridentity (ireduce-right f ridentity (iq e1)) ;=> (f e1 ridentity) ;=> e1 (ireduce-right f ridentity (iq e1 e2 ...)) ;=> (f e1 (ireduce f ridentity (e2 ...)))

...in other words, we compute

`(ifold-right f ridentity ilist)`.;; Append a bunch of ilists together. ;; I.e., (iapply iappend ilist-of-ilists) (ireduce-right iappend '() ilist-of-ilists)

`iunfold``p``f``g``seed``#!optional``tail-gen`procedure`iunfold`is best described by its basic recursion:(iunfold p f g seed) = (if (p seed) (tail-gen seed) (ipair (f seed) (iunfold p f g (g seed))))

- p
- Determines when to stop unfolding.
- f
- Maps each seed value to the corresponding ilist element.
- g
- Maps each seed value to next seed value.
- seed
- The "state" value for the unfold.
- tail-gen
- Creates the tail of the ilist; defaults to
`(lambda (x) '())`

In other words, we use g to generate a sequence of seed values seed, (g seed), (g2 seed), (g3 seed), ... These seed values are mapped to ilist elements by

`f`, producing the elements of the result ilist in a left-to-right order.`P`says when to stop (i.e. when it returns true the procedure ends).`iunfold`is the fundamental recursive ilist constructor, just as`ifold-right`is the fundamental recursive ilist consumer. While`iunfold`may seem a bit abstract to novice functional programmers, it can be used in a number of ways:;; Ilist of squares: 1^2 ... 10^2 (iunfold (lambda (x) (> x 10)) (lambda (x) (* x x)) (lambda (x) (+ x 1)) 1) (iunfold null-ilist? icar icdr lis) ; Copy a proper ilist. ;; Read current input port into an ilist of values. (iunfold eof-object? values (lambda (x) (read)) (read)) ;; Copy a possibly non-proper ilist: (iunfold not-ipair? icar icdr lis values) ;; Append HEAD onto TAIL: (iunfold null-ilist? icar icdr head (lambda (x) tail))

Interested functional programmers may enjoy noting that

`ifold-right`and`iunfold`are in some sense inverses. That is, given operations`knull?`,`kar`,`kdr`,`kons`, and knil satisfying(kons (kar x) (kdr x)) ;=> x ;AND (knull? knil) ;=> #t

then

(ifold-right kons knil (iunfold knull? kar kdr x)) ;=> x ;AND (iunfold knull? kar kdr (ifold-right kons knil x)) ;=> x

This combinator sometimes is called an "anamorphism;" when an explicit tail-gen procedure is supplied, it is called an "apomorphism."

`iunfold-right``p``f``g``seed``#!optional``tail`procedure`iunfold-right`constructs an ilist with the following loop:(let lp ((seed seed) (lis tail)) (if (p seed) lis (lp (g seed) (ipair (f seed) lis))))

- p
- Determines when to stop unfolding.
- f
- Maps each seed value to the corresponding ilist element.
- g
- Maps each seed value to next seed value.
- seed
- The "state" value for the unfold.
- tail
- ilist terminator; defaults to '().

In other words, we use g to generate a sequence of seed values seed, (g seed), (g2 seed), (g3 seed), ... These seed values are mapped to ilist elements by

`f`, producing the elements of the result ilist in a right-to-left order.`P`says when to stop.`iunfold-right`is the fundamental iterative ilist constructor, just as`ifold`is the fundamental iterative ilist consumer. While`iunfold-right`may seem a bit abstract to novice functional programmers, it can be used in a number of ways:;; Ilist of squares: 1^2 ... 10^2 (iunfold-right zero? (lambda (x) (* x x)) (lambda (x) (- x 1)) 10) ;; Reverse a proper ilist. (iunfold-right null-ilist? icar icdr lis) ;; Read current input port into an ilist of values. (iunfold-right eof-object? values (lambda (x) (read)) (read)) ;; (iappend-reverse rev-head tail) (iunfold-right null-ilist? icar icdr rev-head tail)

`imap``proc``ilist1``ilist2``...`procedure`proc`is a procedure taking as many arguments as there are ilist arguments and returning a single value.`imap`applies`proc`element-wise to the elements of the ilists and returns an ilist of the results, in order. The dynamic order in which`proc`is applied to the elements of the ilists is unspecified.(imap icadr (iq (a b) (d e) (g h))) ;=> (b e h) (imap (lambda (n) (expt n n)) (iq 1 2 3 4 5)) ;=> (1 4 27 256 3125) (imap + (iq 1 2 3) (iq 4 5 6)) ;=> (5 7 9) (let ((count 0)) (imap (lambda (ignored) (set! count (+ count 1)) count) (iq a b))) ;=> (1 2) or (2 1)

`ifor-each``proc``ilist1``ilist2``...`procedureThe arguments to

`ifor-each`are like the arguments to`imap`, but`ifor-each`calls`proc`for its side effects rather than for its values. Unlike`imap`,`ifor-each`is guaranteed to call`proc`on the elements of the ilists in order from the first element(s) to the last, and the value returned by`ifor-each`is unspecified.(let ((v (make-vector 5))) (ifor-each (lambda (i) (vector-set! v i (* i i))) (iq 0 1 2 3 4)) v) ;=> #(0 1 4 9 16)

`iappend-map``f``ilist1``ilist2``...`procedureEquivalent to

`(iapply iappend (imap f ilist1 ilist2 ...))`and`(iapply iappend (imap f ilist1 ilist2 ...))`. Map`f`over the elements of the ilists, just as in the`imap`function. However, the results of the applications are appended together (using`iappend`) to make the final result.The dynamic order in which the various applications of

`f`are made is not specified.Example:

(iappend-map (lambda (x) (ilist x (- x))) (iq 1 3 8)) ;=> (1 -1 3 -3 8 -8)

`imap-in-order``f``ilist1``ilist2``...`procedureA variant of the

`imap`procedure that guarantees to apply`f`across the elements of the`ilisti`arguments in a left-to-right order. This is useful for mapping procedures that both have side effects and return useful values.

`ipair-for-each``f``ilist1``ilist2``...`procedureLike

`ifor-each`, but`f`is applied to successive sub-ilists of the argument ilists. That is,`f`is applied to the cells of the ilists, rather than the ilists' elements. These applications occur in left-to-right order.(ipair-for-each (lambda (ipair) (display ipair) (newline)) (iq a b c)) ;=> (a b c) ;=> (b c) ;=> (c)

`ifilter-map``f``ilist1``ilist2``...`procedureLike

`imap`, but only true values are saved.(ifilter-map (lambda (x) (and (number? x) (* x x))) (iq a 1 b 3 c 7)) ;=> (1 9 49)

The dynamic order in which the various applications of

`f`are made is not specified.

### Filtering & partitioning

`ifilter``pred``ilist`procedureReturn all the elements of

`ilist`that satisfy predicate`pred`. The ilist is not disordered — elements that appear in the result ilist occur in the same order as they occur in the argument`ilist`. The returned ilist may share a common tail with the argument`ilist`. The dynamic order in which the various applications of`pred`are made is not specified.(ifilter even? (iq 0 7 8 8 43 -4)) ;=> (0 8 8 -4)

`ipartition``pred``ilist`procedurePartitions the elements of

`ilist`with predicate`pred`, and returns two values: the ilist of in-elements and the ilist of out-elements. The ilist is not disordered — elements occur in the result ilists in the same order as they occur in the argument`ilist`. The dynamic order in which the various applications of pred are made is not specified. One of the returned ilists may share a common tail with the argument`ilist`.(ipartition symbol? (iq one 2 3 four five 6)) ;=> (one four five) ;=> (2 3 6)

`iremove``pred``ilist`procedureReturns

`ilist`without the elements that satisfy predicate`pred`:(lambda (pred ilist) (ifilter (lambda (x) (not (pred x))) ilist))

The ilist is not disordered — elements that appear in the result ilist occur in the same order as they occur in the argument

`ilist`. The returned ilist may share a common tail with the argument`ilist`. The dynamic order in which the various applications of`pred`are made is not specified.(iremove even? (iq 0 7 8 8 43 -4)) ;=> (7 43)

### Searching

The following procedures all search ilists for a leftmost element satisfying some criteria. This means they do not always examine the entire ilist; thus, there is no efficient way for them to reliably detect and signal an error when passed a dotted ilist. Here are the general rules describing how these procedures work when applied to different kinds of ilists:

- Proper ilists
- The standard, canonical behavior happens in this case.
- Dotted ilists
- It is an error to pass these procedures a dotted ilist that

does not contain an element satisfying the search criteria. That is, it is an error if the procedure has to search all the way to the end of the dotted ilist. However, this SRFI does not specify anything at all about the behavior of these procedures when passed a dotted ilist containing an element satisfying the search criteria. It may finish successfully, signal an error, or perform some third action. Different implementations may provide different functionality in this case; code which is compliant with this SRFI may not rely on any particular behavior. Future SRFIs may refine this SRFI to define specific behavior in this case.

In brief, compliant code may not pass a dotted ilist argument to these procedures.

Here are some examples, using the `ifind` and `iany` procedures as canonical representatives:

;; Proper ilist — success (ifind even? (iq 1 2 3)) ;=> 2 (iany even? (iq 1 2 3)) ;=> #t ;; proper ilist — failure (ifind even? (iq 1 7 3)) ;=> #f (iany even? (iq 1 7 3)) ;=> #f ;; Failure is error on a dotted ilist. (ifind even? (ipair 1 (ipair 3 'x))) ;=> error (iany even? (ipair 1 (ipair 3 'x))) ;=> error ;; The dotted ilist contains an element satisfying the search. ;; This case is not specified — it could be success, an error, ;; or some third possibility. (ifind even? (ipair 1 (ipair 2 'x))) ;=> error/undefined (iany even? (ipair 1 (ipair 2 'x))) ;=> error/undefined ; success, error or other.

`ifind``pred``ilist`procedureReturn the first element of

`ilist`that satisfies predicate`pred`; false if no element does.(ifind even? (iq 3 1 4 1 5 9)) ;=> 4

Note that

`ifind`has an ambiguity in its lookup semantics — if`ifind`returns`#f`, you cannot tell (in general) if it found a`#f`element that satisfied pred, or if it did not find any element at all. In many situations, this ambiguity cannot arise — either the ilist being searched is known not to contain any`#f`elements, or the ilist is guaranteed to have an element satisfying`pred`. However, in cases where this ambiguity can arise, you should use`ifind-tail`instead of`ifind`--`ifind-tail`has no such ambiguity:(cond ((ifind-tail pred lis) => (lambda (ipair) ...)) ; Handle (icar ipair) (else ...)) ; Search failed.

`ifind-tail``pred``ilist`procedureReturn the first ipair of

`ilist`whose`icar`satisfies`pred`. If no ipair does, return false.`ifind-tail`can be viewed as a general-predicate variant of the`imember`function.Examples:

(ifind-tail even? (iq 3 1 37 -8 -5 0 0)) ;=> (-8 -5 0 0) (ifind-tail even? (iq 3 1 37 -5)) ;=> #f ;; IMEMBER X LIS: (ifind-tail (lambda (elt) (equal? x elt)) lis)

`ifind-tail`is essentially`idrop-while`, where the sense of the predicate is inverted:`ifind-tail`searches until it finds an element satisfying the predicate;`idrop-while`searches until it finds an element that doesn't satisfy the predicate.

`itake-while``pred``ilist`procedureReturns the longest initial prefix of

`ilist`whose elements all satisfy the predicate`pred`.(itake-while even? (iq 2 18 3 10 22 9)) ;=> (2 18)

`idrop-while``pred``ilist`procedure`idrops`the longest initial prefix of`ilist`whose elements all satisfy the predicate`pred`, and returns the rest of the ilist.(idrop-while even? (iq 2 18 3 10 22 9)) ;=> (3 10 22 9)

`ispan``pred``ilist`procedure`ibreak``pred``ilist`procedure`ispan`splits the`ilist`into the longest initial prefix whose elements all satisfy`pred`, and the remaining tail.`ibreak`inverts the sense of the predicate: the tail commences with the first element of the input`ilist`that satisfies the predicate.In other words:

`ispan`finds the initial span of elements satisfying`pred`, and`ibreak`breaks the`ilist`at the first element satisfying`pred`.`ispan`is equivalent to(values (itake-while pred ilist) (idrop-while pred ilist)) (ispan even? (iq 2 18 3 10 22 9)) => (2 18) (3 10 22 9) (ibreak even? (iq 3 1 4 1 5 9)) => (3 1) (4 1 5 9)

`iany``pred``ilist1``ilist2``...`procedureApplies the predicate across the ilists, returning true if the predicate returns true on any application.

If there are n ilist arguments

`ilist1`...`ilistn`, then`pred`must be a procedure taking n arguments and returning a boolean result.`iany`applies`pred`to the first elements of the`ilisti`parameters. If this application returns a true value,`iany`immediately returns that value. Otherwise, it iterates, applying`pred`to the second elements of the`ilisti`parameters, then the third, and so forth. The iteration stops when a true value is produced or one of the ilists runs out of values; in the latter case,`iany`returns`#f`. The application of`pred`to the last element of the ilists is a tail call.Note the difference between

`ifind`and`iany`—`ifind`returns the element that satisfied the predicate;`iany`returns the true value that the predicate produced.Like

`ievery`,`iany`'s name does not end with a question mark — this is to indicate that it does not return a simple boolean (`#t`or`#f`), but a general value.(iany integer? (iq a 3 b 2.7)) ;=> #t (iany integer? (iq a 3.1 b 2.7)) ;=> #f (iany < (iq 3 1 4 1 5) (iq 2 7 1 8 2)) ;=> #t

`ievery``pred``ilist1``ilist2``...`procedureApplies the predicate across the ilists, returning true if the predicate returns true on every application.

If there are n ilist arguments

`ilist1`...`ilistn`, then`pred`must be a procedure taking n arguments and returning a boolean result.`ievery`applies pred to the first elements of the`ilisti`parameters. If this application returns false,`ievery`immediately returns`false`. Otherwise, it iterates, applying`pred`to the second elements of the`ilisti`parameters, then the third, and so forth. The iteration stops when a false value is produced or one of the ilists runs out of values. In the latter case,`ievery`returns the true value produced by its final application of`pred`. The application of`pred`to the last element of the ilists is a tail call.If one of the

`ilisti`has no elements,`ievery`simply returns`#t`.Like

`iany`,`ievery`'s name does not end with a question mark — this is to indicate that it does not return a simple boolean (`#t`or`#f`), but a general value.

`ilist-index``pred``ilist1``ilist2``...`procedureReturn the index of the leftmost element that satisfies

`pred`.If there are n ilist arguments

`ilist1`...`ilistn`, then pred must be a function taking n arguments and returning a boolean result.`ilist-index`applies`pred`to the first elements of the`ilisti`parameters. If this application returns true,`ilist-index`immediately returns zero. Otherwise, it iterates, applying`pred`to the second elements of the`ilisti`parameters, then the third, and so forth. When it finds a tuple of ilist elements that cause`pred`to return true, it stops and returns the zero-based index of that position in the ilists.The iteration stops when one of the ilists runs out of values; in this case,

`ilist-index`returns`#f`.(ilist-index even? (iq 3 1 4 1 5 9)) ;=> 2 (ilist-index < (iq 3 1 4 1 5 9 2 5 6) (iq 2 7 1 8 2)) ;=> 1 (ilist-index = (iq 3 1 4 1 5 9 2 5 6) (iq 2 7 1 8 2)) ;=> #f

`imember``x``ilist``#!optional``=`procedure`imemq``x``ilist`procedure`imemv``x``ilist`procedureThese procedures return the first sub-ilist of

`ilist`whose`icar`is`x`, where the sub-ilists of`ilist`are the non-empty ilists returned by`(idrop ilist i)`for i less than the length of ilist. If`x`does not occur in`ilist`, then`#f`is returned.`imemq`uses`eq?`to compare`x`with the elements of`ilist`, while`imemv`uses`eqv?`, and`imember`uses`equal?`.(imemq 'a (iq a b c)) ;=> (a b c) (imemq 'b (iq a b c)) ;=> (b c) (imemq 'a (iq b c d)) ;=> #f (imemq (list 'a) (ilist 'b '(a) 'c)) ;=> #f (imember (list 'a) (ilist 'b '(a) 'c))) ;=> ((a) c) (imemq 101 (iq 100 101 102)) ;=> *unspecified* (imemv 101 (iq 100 101 102)) ;=> (101 102)

The comparison procedure is used to compare the elements ei of ilist to the key

`x`in this way:(= x ei) ; ilist is (E1 ... En)

That is, the first argument is always x, and the second argument is one of the ilist elements. Thus one can reliably find the first element of ilist that is greater than five with (imember 5 ilist <)

Note that fully general ilist searching may be performed with the ifind-tail and ifind procedures, e.g.

(ifind-tail even? ilist) ; Find the first elt with an even key.

### Deleting

`idelete``x``ilist``#!optional``=`procedure`idelete`uses the comparison procedure`=`, which defaults to`equal?`, to find all elements of`ilist`that are equal to`x`, and deletes them from`ilist`. The dynamic order in which the various applications of {{}}=}} are made is not specified.The ilist is not disordered — elements that appear in the result ilist occur in the same order as they occur in the argument

`ilist`. The result may share a common tail with the argument`ilist`.Note that fully general element deletion can be performed with the

`iremove`procedures, e.g.:;; idelete all the even elements from LIS: (iremove even? lis)

The comparison procedure is used in this way:

`(= x ei)`. That is,`x`is always the first argument, and an`ilist`element is always the second argument. The comparison procedure will be used to compare each element of`ilist`exactly once; the order in which it is applied to the various`ei`is not specified. Thus, one can reliably remove all the numbers greater than five from an ilist with`(idelete 5 ilist <)`

`idelete-duplicates``ilist``#!optional``=`procedure`idelete-duplicates`removes duplicate elements from the`ilist`argument. If there are multiple equal elements in the argument`ilist`, the result ilist only contains the first or leftmost of these elements in the result. The order of these surviving elements is the same as in the original`ilist`--`idelete-duplicates`does not disorder the ilist (hence it is useful for "cleaning up" immutable association lists).The

`=`parameter is used to compare the elements of the`ilist`; it defaults to`equal?`. If`x`comes before`y`in ilist, then the comparison is performed`(= x y)`. The comparison procedure will be used to compare each pair of elements in`ilist`no more than once; the order in which it is applied to the various pairs is not specified.Implementations of

`idelete-duplicates`are allowed to share common tails between argument and result ilists -- for example, if the`ilist`argument contains only unique elements, it may simply return exactly this ilist.Be aware that, in general,

`idelete-duplicates`runs in time O(n^2) for n-element ilists. Uniquifying long ilists can be accomplished in O(n lg n) time by sorting the`ilist`to bring equal elements together, then using a linear-time algorithm to remove equal elements. Alternatively, one can use algorithms based on element-marking, with linear-time results.(idelete-duplicates (iq a b a c a b c z)) ;=> (a b c z) ;; Clean up an ialist: (idelete-duplicates (iq (a . 3) (b . 7) (a . 9) (c . 1)) (lambda (x y) (eq? (icar x) (icar y)))) ;=> ((a . 3) (b . 7) (c . 1))

### Immutable association lists

An "immutable association list" (or "ialist") is an ilist of ipairs. The `icar` of each ipair contains a key value, and the `icdr` contains the associated data value. They can be used to construct simple look-up tables in Scheme. Note that ialists are probably inappropriate for performance-critical use on large data; in these cases, immutable maps or some other alternative should be employed.

`iassoc``key``ialist``#!optional``=`procedure`iassq``key``ialist`procedure`iassv``key``ialist`procedure`ialist`must be an immutable association list — an ilist of ipairs. These procedures find the first ipair in ialist whose icar field is`key`, and returns that ipair. If no ipair in ialist has key as its`icar`, then`#f`is returned.`iassq`uses`eq?`to compare key with the`icar`fields of the ipairs in`ialist`, while`iassv`uses`eqv?`and`iassoc`uses`equal?`.(define e (iq (a 1) (b 2) (c 3))) (iassq 'a e) ;=> (a 1) (iassq 'b e) ;=> (b 2) (iassq 'd e) ;=> #f (iassq (ilist 'a) (iq ((a)) ((b)) ((c)))) ;=> #f (iassoc '(a) (ilist '((a)) '((b)) '((c)))) ;=> ((a)) (iassq 5 (iq (2 3) (5 7) (11 13))) ;=> *unspecified* (iassv 5 (iq (2 3) (5 7) (11 13))) ;=> (5 7)

The comparison procedure is used to compare the elements

`ei`of ilist to the`key`parameter in this way:(= key (icar ei)) ; ilist is (E1 ... En)

That is, the first argument is always

`key`, and the second argument is one of the ilist elements. Thus one can reliably find the first entry of`ialist`whose`key`is greater than five with`(iassoc 5 ialist <)`.Note that fully general

`ialist`searching may be performed with the`ifind-tail`and`ifind`procedures, e.g.;; Look up the first association in ialist with an even key: (ifind (lambda (a) (even? (icar a))) ialist)

`ialist-cons``key``datum``ialist`procedure-
(lambda (key datum ialist) (ipair (ipair key datum) ialist))

Construct a new ialist entry mapping key -> datum onto ialist.

`ialist-delete``key``ialist``#!optional``=`procedure`ialist-delete`deletes all associations from`ialist`with the given key, using key-comparison procedure`=`, which defaults to`equal?`. The dynamic order in which the various applications of`=`are made is not specified.Return values may share common tails with the

`ialist`argument. The`ialist`is not disordered -- elements that appear in the result ialist occur in the same order as they occur in the argument`ialist`.The comparison procedure is used to compare the element keys

`ki`of`ialist`'s entries to the key parameter in this way:`(= key ki)`. Thus, one can reliably remove all entries of`ialist`whose key is greater than five with`(ialist-delete 5 ialist <)`

### Replacement

These two procedures are analogues of the primitive side-effect operations on pairs, `set-car!` and `set-cdr!`.

`replace-icar``ipair``object`procedureThis procedure returns an ipair with object in the icar field and the icdr of

`ipair`in the icdr field.

`replace-icdr``ipair``object`procedureThis procedure returns an ipair with object in the icdr field and the icar of

`ipair`in the icar field.

### Conversion

These procedures convert between mutable and immutable pair structures.

`pair->ipair``pair`procedure`ipair->pair``ipair`procedureThese procedures, which are inverses, return an ipair and a pair respectively that have the same (i)car and (i)cdr fields as the argument.

`list->ilist``flist`procedure`ilist->list``dlist`procedureThese procedures return an ilist and a list respectively that have the same elements as the argument. The tails of dotted (i)lists are preserved in the result, which makes the procedures not inverses when the tail of a dotted ilist is a list or vice versa. The empty list is converted to itself.

It is an error to apply

`list->ilist`to a circular list.

`tree->itree``obj`procedure`itree->tree``obj`procedureThese procedures walk a tree of pairs or ipairs respectively and make a deep copy of it, returning an isomorphic tree containing ipairs or pairs respectively. The result may share structure with the argument. If the argument is not of the expected type, it is returned.

These procedures are not inverses in the general case. For example, a pair of ipairs would be converted by

`tree->itree`to an ipair of ipairs, which if converted by`itree->tree`would produce a pair of pairs.

`gtree->itree``obj`procedure`itree->gtree``obj`procedureThese procedures walk a generalized tree consisting of pairs, ipairs, or a combination of both, and make a deep copy of it, returning an isomorphic tree containing only ipairs or pairs respectively. The result may share structure with the argument. If the argument is neither a pair nor an ipair, it is returned.

### Procedure application

This procedure allows a procedure to be applied to an ilist.

`iapply``procedure``object``...``ilist`procedureThe iapply procedure is an analogue of apply whose last argument is an ilist rather than a list. It is equivalent to

`(apply procedure object ... (ilist->list ilist))`, but may be implemented more efficiently.

### Comparators

Currently not implemented in the sample implementation. Future versions should provide support for this through SRFI-128, as SRFI-114 has been deprecated in favour of this SRFI.

## Repository

## Version History

- 1.4
- Merges mailing list fixes for ilist=, ievery, and exports from Peter Lane.
- 1.3
- Removes hardcoded .so extension in setup
- 1.2
- Adds standard README.org to SRFIs
- 1.1
- Packages egg without extraneous files
- 1.0
- Initial release

## License

Copyright (C) John Cowan (2014-2016). All Rights Reserved.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.