- Version history
- Source repository
glls (GL Lisp Shaders) lets you write GLSL (OpenGL Shader Language) shaders in a convenient pseudo-scheme language in Chicken Scheme. The compilation into GLSL happens at compile-time for zero run-time cost. Run-time compilation and dynamic recompilation is also supported. To those that want to dynamically construct shaders: I solute you.
In addition to the eponymous module, glls also provides the glls-render module. glls-render enhances glls to create automatic rendering functions for each pipeline. When compiled, these rendering functions are created in efficient C, although dynamic functions are also provided. See the section Automatic render functions for details.
The idea for glls was hugely inspired by Varjo. Before learning about Varjo, I had never considered the possibility of writing shaders in anything but the GLSL. Seeing them being written in Lisp was a major, "Of course!" moment.
That said, while this library bears some superficial resemblance to Varjo, the approach is quite different. While Varjo does a lot of work to validate the the lispy-glls expressions (including type checking), glls only performs cursory syntactic checking. The result of this is that one could probably write shaders in Varjo without knowing the GLSL and could be reasonably sure that those shaders would always compile to something that would mostly work. glls makes no such promises, so it is entirely possible to generate GLSL that won’t compile. Being able to understand GLSL code is therefore a prerequisite for successful shader debugging. The GLSL code output by glls is beautifully formatted, thanks to Alex Shinn’s amazing fmt library. fmt is responsible for far more than just the GLSL formatting, since it is basically a compiler of its own. The compilation portion of glsl is more or less a thin layer on top of fmt.
glls should work on Linux, Mac OS X, Windows, and with OpenGL ES. glls will automatically compile with ES support on ARM hardware, or when gles is defined during compilation (e.g. chicken-install -D gles).
glls contains three modules: glls-render, glls, and glls-compiler. glls-render rexports glls and glls-compiler and is used when you want the functionality of glls plus the addition of automatically generated render functions. glls is the primary module, providing the main interface to shaders and pipelines, which also rexports glls-compiler. glls-compiler provides the functions used to compile shaders.
- glsl-version parameter
The default GLSL version used by shaders. Defaults to 120 on GL ES platforms, 330 otherwise. When compiling a file with a shader, this modifying this parameter will only take effect if you change it before the compilation phase. E.g.:
(use-for-syntax glls) (begin-for-syntax (glsl-version 300))
- (shader TYPE SOURCE INPUTS OUTPUTS UNIFORMS PROGRAM) record
Used to represent shaders. Returned by define-shader and create-shader. It should not typically be necessary to access the slots of this record.
- (define-shader SHADER-NAME GLLS-SHADER) syntax
Defines a new shader named NAME. The (unquoted) form GLLS-SHADER should conform to language defined in the section The glls shader language. Before shaders are used, they must be compiled by OpenGL with compile-shader.
- (create-shader GLLS-SHADER ) procedure
Creates (at run-time) a new shader. The form GLLS-SHADER should conform to language defined in the section The glls shader language. Before shaders are used, they must be compiled by OpenGL with compile-shader.
- (compile-glls GLLS-SHADER) procedure
Returns the source string for a shader. The form GLLS-SHADER should conform to language defined in the section The glls shader language.
- (compile-shader SHADER) procedure
Compile (in OpenGL) SHADER. Nothing is done if the shader has already been compiled. This typically does not need to be called, since compile-pipeline does so. Must be called while there is an active OpenGL context.
Pipelines are the term that glsl uses to describe a collection of shaders that will be linked together. This is equivalent to a GL program, just less ambiguously named.
- (pipeline SHADERS ATTRIBUTES UNIFORMS PROGRAM) record
Created with define-pipeline or create-pipeline, contains the data needed for a pipeline. SHADERS is the list of shader records. ATTRIBUTES and UNIFORMS are lists of the attributes and uniforms of the shader, specified as (name . type) pairs before compilation (with compile-pipeline or compile-pipelines) and (name location type) lists after compilation. PROGRAM is the GL ID of the program (always 0 before compilation).
- (define-pipeline PIPELINE-NAME . SHADERS) syntax
Defines a new pipeline named NAME. The SHADERS should either be forms conforming to language defined in the section The glls shader language, shaders defined by define-shader, or a mix of the two. Pipelines must have at least one vertex and one fragment shader to be able to compile. Before pipelines are used, they must be compiled by OpenGL with compile-pipeline or compile-pipelines.
define-pipeline behaves differently when it is being evaluated and when a given pipeline is being redefined. In this case, the new pipeline inherits the GL program ID of the old one. Additionally, the pipeline is compiled by OpenGL right away (and as a consequence, so are any pipelines that are pending compilation). This is done so that pipelines can be edited and reevaluated in a REPL session and one’s scene will be updated as expected. See the interactive example for an example of how this can be accomplished.
define-pipeline has additional effects when used with the glls-render module (see Automatic render functions).
- (create-pipeline . SHADERS) procedure
Creates (at run-time) a new pipeline. The SHADERS should either be forms conforming to language defined in the section The glls shader language, shaders, or a mix of the two. Pipelines must have at least one vertex and one fragment shader to be able to compile. Before pipelines are used, they must be compiled by OpenGL with compile-pipeline or compile-pipelines.
- (compile-pipeline PIPELINE) procedure
Compile (in OpenGL) the PIPELINE and sets its PROGRAM slot to the OpenGL program ID. If the pipeline’s PROGRAM slot is already set to a non-zero value, this ID will be reused for the new program. Compiles all of the pipeline’s shaders with compile-shader. Must be called while there is an active OpenGL context.
- (compile-pipelines) procedure
Compile (as per compile-pipeline) all the pipelines defined by define-pipeline and create-pipeline. Must be called while there is an active OpenGL context.
- (pipeline-uniform UNIFORM PIPELINE) procedure
Return the location of UNIFORM. The PIPELINE must be compiled before this function can be used.
- (pipeline-attribute ATTRIBUTE PIPELINE) procedure
Return the location of ATTRIBUTE. The PIPELINE must be compiled before this function can be used.
- (pipeline-mesh-attributes PIPELINE) procedure
Return a list of (ATTRIBUTE-NAME . LOCATION) pairs, suitable for passing to gl-utils’ mesh-make-vao!.
The shaders of glls – the forms that define-shader, define-pipeline, etc. expect – have the following syntax:
(<type> [input: <inputs>] [uniform: <uniforms>] [output: <outputs>] [version: <version>] [use: <imports>] [export: <exports]) <body> ...
type is the keyword type of the shader. It must be one of #:vertex, #:fragment, #:geometry, #:tess-control, #:tess-evaluation, or #:compute.
inputs is a list of the input variables for the shader. These are given in (name type) lists.
uniforms is a list of the uniform variables for the shader. These are given in (name type) lists.
outputs is a list of the output variables from the shader. These are given in (name type) lists.
version is the integer version number of the shader, i.e. the number you would write at the top of the shader source (e.g. #version 410). Defaults to the glsl-version parameter.
imports is the list of shaders that the current shader depends on. See the section Shaders that export for more details. Defaults to ()
exports is the list of symbols that the current shader exports. See the section Shaders that export for more details. Defaults to ()
body is the form representing the code of the shader. See the section Shader Lisp for an explanation of the kind of code that is expected.
For the most part, the Lisp used to define glls shaders looks like Scheme with one notable difference: types must be specified whenever a variable or function is defined. Under the hood, forms are being passed to fmt, so everything that you can do there will work in glls. Details of the Lisp used for shaders is provided in the following sections.
It should be possible to do almost anything in glls that you would want to do with the GLSL. Known exceptions to this is are: layout qualifiers (which I don’t feel are terribly relevant in the context of Scheme, at least not until uniform locations become prevalent), do-while loops (which have no Scheme analog), and uniform blocks, #line, #undef, and struct uniforms all for no good reason. Let me know if there are any features that you find lacking.
Keep in mind that glls cannot do anything that the GLSL can’t, such as making anonymous or recursive functions.
Symbols in glls are transformed from a Scheme style into the C style used in the GLSL. Letters after dashes are uppercased (i.e., symbols become camelCased). Symbols prefixed by gl: in glls become prefixed by gl_ in GLSL. #f and #t may be used instead of false and true.
For programmer-defined variables this has little consequence. The importance of learning the renaming conventions comes when you want to call GLSL functions or variables. Examples of mappings between glls and GLSL names are: gl:position → gl_Position, float-bits-to-uint → floatBitsToUint, shadow-2d-proj-lod → shadow2DProjLod, and sampler-2d-ms-array → sampler2DMSArray. Two special cases are emit-vertex and end-primitive which are translated into the functions EmitVertex and EndPrimitive respectively (which, for some reason, go against the usual GLSL naming conventions).
When defining variables or functions in glls, types must be supplied. Basic types (e.g. int, mat2x2) are given either as a symbol or keyword (e.g. int, #:mat2x2), whichever is preferred. Types with qualifiers (e.g. lowp float, out mediump vec2) are given as lists (e.g. (lowp float), (out mediump vec2)).
Arrays are specified as lists beginning with the keyword #:array. The next element in the list is the type, while the optional third element is the size. E.g. (#:array int 5). When used with qualifiers, the array takes the place of the type, e.g. (highp (#:array float)).
GLSL functions and operators are all called like normal Lisp functions. In almost all cases the GLSL symbol (taking into account the renaming described in Variables and naming can be used, while many operators can be called with their Scheme counterpart. The only operators that may not be used directly are |, ||, |=, ., =, and array reference which must be called with their counterparts.
The following is a mapping between glls aliases for GLSL functions and operators:
- modulo: %
- expt: pow
- equal?, eqv?, eq, =: ==
- set!: =
- and: &&
- or: ||
- not: !
- bitwise-and: &
- bitwise-ior: |
- bitwise-xor: ^
- bitwise-not: ~
- arithmetic-shift: <<
- bitwise-and=: &=
- bitwise-ior=: |=
- bitwise-xor=: ^=
- arithmetic-shift=: <<=
- ++/post: Postfix ++
- --/post: Postfix --
- field, ..: . (struct field reference, e.g. (field point x) → point.x)
- swizzle, ~~: . (vector swizzling, e.g. (swizzle color r g) → color.rg)
- array-ref, vector-ref:  (array reference, e.g. (array-ref a 4) → a)
- array-set!, vector-set!:  = (array setting, e.g. (array-set! a 4 x) → a = x)
- length: .length() (vector length, e.g. (length vec) → vec.length())
Variables, functions, and records (structs) are defined much like they are in Scheme, with the additional requirement of including types.
(define <name> <type> [<value>])
Defines the variable name. When type is an array, a vector literal (eg. #(1 2 3)) may be used as the initial value.
(define (<name> [(<parameter> <type>) ...]) <return-type> <body> ...)
Defines the function name. The last expression in the body of a non-void function is automatically returned. If body is omitted, a function prototype is created.
(let ((<name> <type> [<value>]) ...) <body> ...)
Defines the supplied variables. When type is an array, a vector literal (eg. #(1 2 3)) may be used as the initial value. Note that, unlike Scheme, the variables created will continue to exist outside of the let (until the extent of whatever lexical scope the let exists within). In other words, let does not introduce scope. Note also that variables defined in let are within the scope of variables that are subsequently defined in the same let (i.e. let functions like let* in Scheme, and in fact let* may be used if preferred).
(define-record <name> (<type> <field>) ...)
Defines the struct name.
The following can be used with identical syntax to scheme:
(if <test> <true> [<false>]) (cond (<test> <result> ...) ... (else <result>)) (begin <body> ...)
Keep in mind that they may only be used in the same place as their corresponding GLSL statements, with the exception of begin, which can only be used where it is possible to have multiple expressions.
Additionally, the following forms can be used for switch/case statements in the GLSL fashion:
(c-switch <clause> ...) (c-case <values> <body> ...) (c-case/fallthrough <values> <body> ...) (c-default <body> ...)
(for <init> <condition> <update> <body> ...)
GLSL style for loop.
(do-times (<var> [<start>] <end>) <body> ...)
Equivalent to (for (define <var> #:int <start>) (< <var> <end>) (++ <var>) <body> ...). start defaults to 0.
(while <condition> <body> ...)
GLSL style while loop.
All GLSL jumps (continue, break, return, discard) can be called like functions. Return may accept one argument. Keep in mind that the last expression in a non void function is automatically returned.
The following forms can be used to add pre-processor directives:
(%define <name> [<value>]) (%if <test> <true> [<false>]) (%ifdef <value> <true> [<false>]) (%ifndef <value> <true> [<false>]) (%elif <value> <true> [<false>]) (%else <fallback>) (%error <value> ...) (%pragma [#:stdgl] <name> <behaviour>)
The optional #:stdgl keyword is used when a STDGL pragma is desired. <name> and <behaviour> will be formatted without modification as <name>(<behaviour>).
(%extension <name> <behaviour>)
<name> and <behaviour> will be formatted without modification as <name> : <behaviour>.
It is often desirable to have shaders that contain generic, reusable functions. These shaders are linked into the pipeline (or program, in GLSL parlance) so that they can be accessed by other shaders. In order for another shader to reuse a function, it first has to (as in C) include a function prototype. glsl automates this process.
glls lets you define shaders that export symbols through the use of the export keyword. These shaders can then be imported by others (through the use keyword). Prototypes are automatically generated for top-level functions or variables whose names match the symbols in the export keyword list. These prototypes are then inserted into shaders that use the exporting shader. Shaders that are used by another are automatically linked into the resulting pipeline.
Shaders that export should not have any inputs or outputs.
See the example exports.scm to see this in action.
By using the glls-render module, you can have glls automatically generate functions that will render an object with your glls pipeline. glls-render wraps define-pipeline so that it also defines a set of functions used for rendering and managing the renderable objects that are specific to that pipeline: one to create them, several to render them, and others to manipulate them. glls-render should not be used with the glls module: It reexports everything that you need from glls.
(define-pipeline PIPELINE-NAME . SHADERS)
There is one difference with glls-render’s define-pipeline: All shaders must include a list of the shader’s uniforms since the uniforms are the important information needed to derive rendering functions. This means that if you previously define some shaders (for example: my-vertex-shader and my-fragment-shader) and you wish to combine them in a pipeline, you must include the uniforms in the pipeline definition. This is done with a list that takes the form (SHADER uniform: [UNIFORM] ...). This list must be present even if the shader does not use any uniforms. For example:
(define-pipeline my-pipeline (my-vertex-shader uniform: mvp-matrix inverse-transpose-matrix) (my-fragment-shader uniform:))
Of course, if you are defining the shaders in the pipeline, then a separate list of uniforms is not necessary.
glls-render’s define-piplelines defines a function for creating renderable objects:
(make-PIPELINE-NAME-renderable [vao: VAO] [mode: MODE] [n-elements: N-ELEMENTS] [element-type: ELEMENT-TYPE] [mesh: MESH] [offset: OFFSET] [data: DATA] + PIPELINE-SPECIFIC-KEYWORDS)
Where PIPELINE-NAME is the name of the pipeline who’s renderables are being created.
- VAO – A VAO such as those returned by opengl-glew’s make-vao. I.e.: A VAO that binds an array of attributes – for each element in the pipeline – as well as an element array.
- MODE – The drawing mode to use when drawing the elements of the VAO. Must be mode that is accepted by (gl-utils’) mode->gl. Defaults to #:triangles.
- N-ELEMENTS – The number of elements (vertices) to draw.
- ELEMENT-TYPE – The type of the values in the VAO’s element array. Must be one of #:unsigned-byte, #:unsigned-short, or #:unsigned-int. Not required if the VAO has no element array (i.e. render-arrays-PIPELINE-NAME is being used to render).
- MESH – A gl-utils mesh, provided in place of VAO, MODE, N-ELEMENTS, and ELEMENT-TYPE.
- OFFSET – A byte offset to the location of the desired indices to draw.
- DATA – An optional pointer to an appropriate glls renderable object. If not provided, a fresh renderable object will be created. gllsRenderable.h defines the structs used for renderables. Which struct is used for a given pipeline is chosen based on the number of uniforms present in the pipeline.
See the glDrawElements documentation for more information about these expected arguments.
make-PIPELINE-NAME-renderable also expects one keyword argument for each uniform in the pipeline. These arguments should either be an f32vector, an s32vector, a u32vector, a pointer to the uniform data, or – in the case of a texture – a fixnum. Even if the uniform is a single value (e.g. a float), it must still be passed as a vector (or a pointer). This lets the value of the uniform be updated independently of the renderable.
Additionally, there are a number of renderable setters for each of the keyword arguments accepted by make-PIPELINE-NAME-renderable:
- (set-renderable-vao! RENDERABLE VAO) procedure
- (set-renderable-n-elements! RENDERABLE N-ELEMENTS) procedure
- (set-renderable-element-type! RENDERABLE TYPE) procedure
- (set-renderable-mode! RENDERABLE MODE) procedure
- (set-renderable-offset! RENDERABLE OFFSET) procedure
(set-PIPELINE-NAME-renderable-UNIFORM-NAME! RENDERABLE UNIFORM-VALUE)
These setters accept two arguments: a renderable and a value. The values correspond to those that make-PIPELINE-NAME-renderable accepts. For each uniform in the pipeline, a function named set-PIPELINE-NAME-renderable-UNIFORM-NAME! is created.
- (renderable-size PIPELINE) procedure
Returns the size, in bytes, of the memory needed for a renderable belonging to PIPELINE.
(render-PIPELINE-NAME RENDERABLE) (render-arrays-PIPELINE-NAME RENDERABLE)
Where PIPELINE-NAME is the name of the pipeline who’s renderables are being rendered. render-PIPELINE-NAME and render-arrays-PIPELINE-NAME both render the given renderable.
These render functions work differently depending on whether the define-pipeline has been compiled or interpreted (although the end results should look the same). When define-pipeline is compiled, the resulting render functions are compiled directly to efficient (non-branching) C. When define-pipeline is interpreted, the render functions call a generic rendering function that is not nearly as fast.
The render-PIPELINE-NAME function draws the renderable using draw-elements. While this is typically the most efficient way to render a set of vertices, sometimes draw-arrays is preferable. render-arrays-PIPELINE-NAME functions identically except for calling draw-arrays instead of draw-elements.
When compiled, the render function defined by define-pipeline is actually a combination of three “fast” render functions: a begin-render function, a render function, and an end-render function. The array rendering function is a similar combination: the begin-render function, an array-render function and the end-render function. This is done so that, if desired, all of the renderables that belong to the same pipeline may be rendered at the same time, without needing to perform expensive calls like program changes or texture binding more than once. To use these functions, call the begin-render function with the first renderable, then call the render (or array-render) function on all renderables (including the first), finally calling the end-render function (with no arguments) to clean up.
define-pipeline does not define all of the render functions separately, but instead defines a single function with which to access them: PIPELINE-NAME-fast-render-functions, where PIPELINE-NAME is the name of the pipeline. This function returns eight values: the begin-render function, the render function, the end-render function, the array-render function, and pointers to those same C functions in that order.
- unique-textures? parameter
This parameter, defaulting to #t, controls where textures are bound in the fast render functions. When unique-textures? is #t, textures are bound in the main render function. When unique-textures? is #f, textures are bound in the begin render function. In other words: when unique-textures? is #f, it is assumed that that all of the renderables belonging to the same pipeline share a common “sprite sheet” (or other shared texture type). This parameter must be set for syntax (i.e. in a begin-for-syntax form) in order to have an effect.
- (export-pipeline . PIPELINES) syntax
Since glls-render causes define-pipeline to define multiple functions, this macro exports everything related to each pipeline in PIPELINES, except for the set-PIPELINE-NAME-renderable-UNIFORM! setters. These must be exported individually.
These examples depends on the glfw3 egg for window and context creation. The examples presented here illustrate only very basic shader definition and loading. For more complete examples, see the examples directory of the source.
Aside from knowing how to write glls shaders, only one macro, one function, and one record is necessary to use glls: define-pipeline, compile-pipelines, and the record pipeline. This example illustrates this minimal pipeline creation
(import chicken scheme) (use glls (prefix glfw3 glfw:) (prefix opengl-glew gl:)) (define-pipeline foo ((#:vertex input: ((vertex #:vec2) (color #:vec3)) uniform: ((mvp #:mat4)) output: ((c #:vec3))) (define (main) #:void (set! gl:position (* mvp (vec4 vertex 0.0 1.0))) (set! c color))) ((#:fragment input: ((c #:vec3)) output: ((frag-color #:vec4))) (define (main) #:void (set! frag-color (vec4 c 1.0))))) (glfw:with-window (640 480 "Example" resizable: #f) (gl:init) (compile-pipelines) (print foo) (gl:use-program (pipeline-program foo)))
This example is similar to the first, but also illustrates the ability to define pipelines in different ways.
(import chicken scheme) (use glls (prefix glfw3 glfw:) (prefix opengl-glew gl:)) (define-pipeline foo ((#:vertex input: ((vertex #:vec2) (color #:vec3)) uniform: ((mvp #:mat4)) output: ((c #:vec3))) (define (main) #:void (set! gl:position (* mvp (vec4 vertex 0.0 1.0))) (set! c color))) ((#:fragment input: ((c #:vec3)) output: ((frag-color #:vec4))) (define (main) #:void (set! frag-color (vec4 c 1.0))))) (define-shader bar (#:vertex input: ((vertex #:vec2) (color #:vec3)) uniform: ((mvp #:mat4)) output: ((c #:vec3))) (define (main) #:void (set! gl:position (* mvp (vec4 vertex 0.0 1.0))) (set! c color))) (define-pipeline baz bar (cadr (pipeline-shaders foo))) (glfw:with-window (640 480 "Example" resizable: #f) (gl:init) (compile-pipelines) (print foo) (print baz))
23 January 2014
- Overhaul compiler so new syntax can be introduced, and so existing syntax more closely maps to GLSL
- Add array initialization
- Move pragma and extension from keywords to forms
25 December 2014
- Export set-renderable-*! functions
24 December 2014
- Add unique-textures? parameter
- export-pipeline exports primary setters
- Better renderable setter error values
8 December 2014
- Add draw-array render functions
- Support OpenGL ES
- Bug fixes
20 October 2014
- Renderable element-type and mode setters take keywords instead of integers
10 September 2014
- Integrate with gl-utils’ meshes
- Remove obsolete load-ply-renderable
24 August 2014
- Update to new gl-utils
- Allow #t, #f
- Fix swizzle
14 August 2014
- New shader syntax
12 August 2014
- Fix export name matching
11 August 2014
- Add shader exports
- Add function prototyping
- Add export-pipeline
- Add aliases to field, swizzle (.., ~~)
- Export renderable-size rather than allocate-renderable
- Improve error messages
- Bug fixes
4 June 2014
- Bug fixes relating to dynamic reevaluated pipelines
3 June 2014
- Update examples for GC safety
2 June 2014
- Fix load-ply-renderable
- Fix gllsRender.h
30 May 2014
- Support dynamic reevaluation of pipelines
29 May 2014
- Add make as a dependency
- Fix bug affecting dynamic use of glls-render
28 May 2014
- Automatic render function generation
- Removed eval from defpipeline (which broke some things when used in modules)
- Renamed defpipeline, defshader
- Initial release
Source available on GitHub.
Bug reports and patches welcome! Bugs can be reported via GitHub or to alex.n.charlton at gmail.